Product Description
1.Products Description
CTHB earth auger application in Landscaping, Tree planting, Well boring, Foundation piles, Screw pile installations, Ground source heat pumps, Pole and Mast Installations, Solar energy piling, Bridge pier drilling etc.
2.Detail Image
3.Appllication
4.Technical Parameter
Model No. | 2000 | 3000 | 4500 | 6000 | 8000 | 10000 | 15000 | 20000 | 25000 |
Excavator Weight | 1.5-3T | 2-4T | 3-5T | 4-6T | 6-8T | 6-10T | 10-15T | 15-20T | 15-25T |
Max Torque | 2000Nm | 3000Nm | 4500Nm | 6000Nm | 8000Nm | 9000Nm | 15000Nm | 20000Nm | 25000Nm |
Pressure Range | 60-240Bar | 70-240Bar | 70-240Bar | 80-240Bar | 80-240Bar | 80-240Bar | 80-240Bar | 80-240Bar | 80-310Bar |
Flow Range | 20-70Lpm | 25-70Lpm | 20-80Lpm | 50-85Lpm | 50-85Lpm | 50-95Lpm | 60-150Lpm | 75-200Lpm | 60-250Lpm |
Output Shaft | 65mm¡ | 65mm¡ | 65mm¡ | 75¨ | 75¨ | 75¨ | 75¨ | 75¨ | 75¨ |
Diameter of Unit Drive | 190mm | 232mm | 238mm | 245mm | 272mm | 280mm | 338mm | 345mm | 355mm |
Max Rotate Speed | 65r/min | 60r/min | 56r/min | 50r/min | 48r/min | 45r/min | 38r/min | 35r/min | 28r/min |
Weight of Unit Drive | 28kg | 74kg | 95kg | 134kg | 160kg | 168kg | 240kg | 272kg | 320kg |
5.Diameter and the Depth of hole to be drilled
Extension Rod
Extension rods are used to extend the drill pipe.
Diameter: 89mm, 108mm,127mm, 146mm.
Length: 1m, 1.5m, 2m, 3m
OR: customization
Auger Drill
The drill pipe is the part of contact with the ground for drilling and fetching.
diameter:100mm-2000mm
maximum deepth:10 m
6.Pin Hitch
7.Teeth & Pilot
Rock auger drill: It fit to rock, pitch or a lot of CHINAMFG land.
Tungsten auger drill: It fit to clay, snady land or a little gravel. CHINAMFG the soil land very easily.
Sharp auger drill: It fit to rock, concrete, cement, asphalt and so on.
8.Company Profile
HangZhou chengtai construction machinery Co., Ltd. is located in the beautiful coastal city of HangZhou,ZheJiang . It is a modern enterprise specializing in R & D, production and sales of front-end hydraulic attachments for excavators. The company has been committed to the development, production and sales of excavator front-end devices for many years. The company mainly produces:various front-end such as hydraulic breaker,compactor,quick connector,ripper, etc. Attachment device can be adapted to domestic and foreign large, medium and small any brand excavators, and can be customized according to the customer’s operating environment requirements Special attachments for working conditions. Our company has advanced production equipment, perfect product testing methods and quality assurance system. The company has a professional technical team, from the development of new products to the production process in the process, and then to the after-sales service of the product, to provide firm technical support for high-quality products.
9.Our certification
10.Hot Sale
11.Packing &delivery
Mode of transport:Deliver by sea/Air/multimodel transport/logistic or Express company is available
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
After-sales Service: | Lifetime After-Sales |
---|---|
Warranty: | 12 Months |
Type: | Hydraulic |
Application: | Excavator |
Certification: | CE, ISO9001: 2000 |
Condition: | New |
Samples: |
US$ 2000/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
How do post hole diggers contribute to the efficiency of tasks like deck construction?
Post hole diggers play a vital role in improving the efficiency of tasks like deck construction. They offer several benefits that enhance the overall construction process and expedite the installation of decks. Here are some ways post hole diggers contribute to the efficiency of tasks like deck construction:
- Precise Hole Digging: Post hole diggers allow for precise and consistent hole digging. They are designed to excavate holes of the desired diameter and depth, ensuring accuracy and uniformity in the placement of deck support posts. This precision is crucial for maintaining the structural integrity and alignment of the deck, especially when multiple posts need to be installed.
- Time and Labor Savings: Compared to manual digging methods, post hole diggers significantly reduce the time and physical effort required to excavate holes for deck posts. The mechanical action of the digger, whether it’s a manual or powered model, allows for quicker and more efficient digging, minimizing the need for strenuous manual labor. This time and labor savings translate to increased productivity and faster completion of the deck construction project.
- Consistent Hole Depth: Achieving consistent hole depths is crucial for achieving a level and stable deck structure. Post hole diggers help maintain consistent hole depths by providing depth control features or markings on the digger. This ensures that all the deck support posts are set at the same height, resulting in an even and uniform deck surface.
- Reduced Soil Disruption: Post hole diggers are designed to minimize soil disruption during the digging process. They remove soil from the hole without disturbing the surrounding area excessively. This is particularly important in deck construction, where the integrity of the adjacent ground needs to be preserved to support the overall stability of the deck and prevent soil erosion.
- Ease of Operation: Post hole diggers are designed to be user-friendly and easy to operate. They typically feature ergonomic handles, balanced weight distribution, and intuitive controls. This ease of operation reduces operator fatigue and allows for more efficient and comfortable digging, especially when multiple holes need to be excavated for a deck construction project.
- Versatility: Post hole diggers offer versatility in terms of the types of soil they can handle. They are designed to tackle different soil conditions, including clay, loam, gravel, or sandy soils. This versatility ensures that the digger can efficiently excavate holes in various locations, enabling deck construction in diverse geographical areas.
- Adaptability to Various Deck Designs: Post hole diggers can accommodate different deck designs and configurations. Whether it’s a small backyard deck or a larger multi-level deck, post hole diggers can be used to excavate holes for support posts at the appropriate locations and spacing dictated by the deck design plans. This adaptability streamlines the construction process and facilitates the realization of various deck designs.
By offering precise hole digging, time and labor savings, consistent hole depth, reduced soil disruption, ease of operation, versatility, and adaptability to various deck designs, post hole diggers significantly contribute to the efficiency of tasks like deck construction. They streamline the process, improve productivity, and help ensure the construction of a sturdy, level, and well-aligned deck structure.
Can post hole diggers be adapted for use in both residential and commercial projects?
Yes, post hole diggers are versatile tools that can be adapted for use in both residential and commercial projects. Their design, features, and capabilities make them suitable for a wide range of applications, regardless of the scale or nature of the project. Here are some reasons why post hole diggers can be effectively used in both residential and commercial projects:
- Size Options: Post hole diggers are available in various sizes to accommodate different project requirements. They come in compact, lightweight versions ideal for residential use, as well as larger, heavy-duty models suitable for commercial projects. The availability of different size options ensures that post hole diggers can be matched to the specific needs of the project, whether it’s a small backyard fence installation or a large-scale commercial construction project.
- Adjustable Depth and Diameter: Many post hole diggers feature adjustable depth and diameter capabilities. This adaptability allows users to customize the digging parameters based on the specific project requirements. Whether it’s digging shallow holes for residential fence posts or deeper holes for commercial applications such as signposts or structural supports, post hole diggers can be adjusted to meet the desired depth and diameter specifications.
- Soil Compatibility: Post hole diggers are designed to handle various soil types commonly encountered in both residential and commercial projects. They can effectively dig holes in soil compositions such as clay, loam, gravel, or sandy soils. This versatility ensures that post hole diggers can be used in different geographical locations, whether it’s a residential backyard or a commercial construction site.
- Portability: Post hole diggers are generally designed to be portable and easy to transport. They can be maneuvered and operated in different project locations, whether it’s a residential property or a commercial worksite. The portability of post hole diggers allows for flexibility and convenience in tackling various projects, making them suitable for both residential and commercial applications.
- Efficiency and Time Savings: In both residential and commercial projects, efficiency and time savings are essential. Post hole diggers offer significant advantages in this regard. Their mechanical action, whether manual or powered, allows for faster and more efficient digging compared to manual methods. This translates to time savings and increased productivity, benefiting both residential homeowners and commercial contractors.
- Multiple Applications: Post hole diggers have multiple applications beyond residential or commercial projects. They can be utilized in various industries such as agriculture, landscaping, and construction. Their versatility makes them valuable tools for tasks like planting trees, installing poles, erecting signs, or setting up outdoor structures. This wide range of applications further highlights the adaptability of post hole diggers across different project types and sectors.
Overall, post hole diggers can be effectively adapted for use in both residential and commercial projects. Their size options, adjustable depth and diameter capabilities, soil compatibility, portability, efficiency, time savings, and multiple applications make them versatile tools that can tackle a wide range of projects, regardless of the residential or commercial context.
How do post hole diggers handle variations in soil types and conditions?
Post hole diggers are designed to handle variations in soil types and conditions, allowing for effective hole digging across different terrains. Here’s how they address these variations:
- Blade Design: Post hole diggers typically feature blades or augers with different designs to accommodate various soil types. For example, some blades have pointed tips and aggressive cutting edges, which are suitable for penetrating hard or compacted soils. Other blades may have a more open design with wider spacing, allowing for easier soil removal in softer or looser soils.
- Auger Size: Post hole diggers come in different auger sizes, allowing for versatility in handling different soil conditions. Larger augers are suitable for digging in softer soils where more soil needs to be displaced, while smaller augers are better for compacted or rocky soils where more effort is required to penetrate the ground.
- Power Source: Motorized post hole diggers, such as gas-powered or electric-powered ones, provide additional power to handle variations in soil types and conditions. The increased torque and rotational force generated by the power source enable the auger blades to overcome resistance in challenging soils, including compacted soil, clay, or rocky terrain.
- Adjustable Depth: Some post hole diggers offer adjustable depth settings, allowing operators to dig holes of varying depths. This feature is particularly useful when encountering different soil layers or when specific hole depths are required for a particular application. Operators can easily adapt the depth setting to match the soil conditions they are working with.
- Operator Technique: The operator’s technique plays a significant role in handling variations in soil types and conditions. Experienced operators know how to adjust the pressure, angle, and rotational speed of the post hole digger based on the specific soil they are working with. They may modify their approach to account for variations in soil hardness, moisture content, or presence of rocks or roots.
- Additional Tools and Accessories: In some cases, additional tools and accessories can be used in conjunction with post hole diggers to address specific soil challenges. For example, soil auger extensions can be added to reach greater depths in deep or sandy soils. Soil loosening agents or water can be employed to soften or moisten the soil, making it easier to dig.
By incorporating these design features, adjusting settings, employing proper technique, and utilizing additional tools if necessary, post hole diggers can effectively handle variations in soil types and conditions. However, it’s important to note that extremely hard or rocky soils may still pose challenges even for post hole diggers. In such cases, alternative methods or specialized equipment may be required to complete the digging task successfully.
editor by CX 2024-05-08
China wholesaler China High Quality Drill Post Hole Digger Earth Auger Drill with Hydraulic Motor pto shaft adapter
Product Description
RAY ATTACHMENTS Earth Auger is a kind of CHINAMFG hole machine. It can be mounted to all common hydraulic excavators as well as mini excavator and other carrier like skid steer loader, backhoe loader,telescopic handler, wheel loader and other machinery.Our auger drive can installed with earth drill, stump planner, mixer bowl for different uses.
Specification:
Model | Oil Folw | Max Torque | Pressure | Rotary Speed | Carrier | Oil Hose | Drill Dia. | |||
gal./min | I/min | Lbf·Ft | N·M | Psi | Bar | Rpm | T | Inch | mm | |
REA2000 | 6-14 | 23-53 | 2537 | 1871 | 3000 | 205 | 40-92 | 1-2.5 | 1/2 | 100-400 |
REA2500 | 8-16 | 30-61 | 3297 | 2432 | 3000 | 205 | 40-82 | 1.5-3 | 1/2 | 100-500 |
REA3000 | 8-16 | 30-61 | 3900 | 2877 | 3500 | 240 | 40-81 | 2-3.5 | 1/2 | 100-600 |
REA3500 | 8-18 | 30-68 | 4900 | 3614 | 3500 | 240 | 32-72 | 2.5-4.5 | 1/2 | 100-750 |
REA4500 | 10-20 | 38-76 | 5719 | 4218 | 3500 | 240 | 32-64 | 3-5 | 1/2 | 100-900 |
REA5000 | 10-20 | 38-76 | 6855 | 5056 | 3500 | 240 | 29-58 | 4.5-7 | 1/2 | 150-600 |
REA5500 | 12-22 | 45-83 | 8012 | 5910 | 3500 | 240 | 28-50 | 5-7 | 1/2 | 150-750 |
REA6000 | 12-28 | 45-106 | 8338 | 6150 | 3500 | 240 | 34-80 | 6-8 | 3/4 | 150-900 |
REA7000 | 16-32 | 61-121 | 9397 | 6931 | 3500 | 240 | 37-72 | 7-10 | 3/4 | 150-900 |
REA8000 | 16-36 | 61-136 | 1571 | 8048 | 3500 | 240 | 29-64 | 8-12 | 3/4 | 150-900 |
REA10000 | 18-36 | 70-136 | 14612 | 1571 | 3500 | 240 | 26-45 | 10-13 | 3/4 | 150-900 |
REA12000 | 21-37 | 80-140 | 16236 | 11976 | 3500 | 240 | 22-43 | 13-17 | 1 | 150-900 |
REA15000 | 21-40 | 80-151 | 20399 | 15046 | 3500 | 240 | 20-39 | 13-17 | 1 | 150-1200 |
REA20000 | 21-45 | 80-170 | 25812 | 19039 | 3500 | 240 | 17-34 | 13-20 | 1 | 150-1200 |
REA25000 | 24-48 | 90-180 | 33825 | 24949 | 3500 | 240 | 16-30 | 15-23 | 1 | 150-1200 |
REA50000 | 26-74 | 100-280 | 68052 | 50195 | 4000 | 280 | 11-30 | 21-50 | 1 | 300-2400 |
Aslo, these details just help you know our products quickly. Please feel free to contact with me ,that’s my duty and honor to help you find the appropriate product.
Packed in strong wooden box, Not easy to be damaged during transportation.
If you want to promote your own brand, We can also provide OEM service .(custom your own brand, color, shape and so on you requested)
If you have these business, feel free to contact us. We sincerely invite global dealer!
HangZhou CHINAMFG International Co., Ltd is a professional manufacturer which was found in 2002 has a lot of experience in construction machinery attachments producing and serving.Our factory is located in HangZhou City, ZheJiang Province, Near to ZheJiang City. Which has large capacity to make various kinds products like hydraulic breaker, earth auger, quick hitch, Vibro ripper,pile breaker and other construction machinery attachments.We are always researching to improve our products’ performance and innovate designing to meet more and more clients’ demands.
Q: Are you a manufacturer?
A: Yes,our factory was established in 2002 and we have our own trading company.
Q: Are you sure your product will fit my excavator?
A: Yes, we are professional about this, you can also tell me your excavator model, and we will check it for you.
Q: Can you provide customers’ design?
A: Sure, we can provide OEM and ODM service.
Q: What’s the MOQ and payment terms?
A: MOQ is 1set. Payment via T/T,L/C, Western Union accepted, other terms can be negotiated.
Q: How about delivery time?
A: 5-25 work days after the payment, depend on your quantity.
Q: How about the package?
A: Our earth auger packed by polywood case.
Q: Which country have you exported?
A: Vietnam, Saudi Arabia, America, Thailand, New Zealand, Canada, Australia, Peru, Chile, Brazil, Mexico, Iran, South Africa, etc.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Certification: | CE, ISO 9001:2008 |
---|---|
Condition: | New |
Drill Hole Diameter: | 100mm – 1200mm |
Drill Hole Depth: | 1m – 30m |
Bit Type: | Tunsten/Rock/Sharp Teeth |
Drilling Way: | Rotary |
Customization: |
Available
| Customized Request |
---|
Can you provide examples of projects or applications that require a post hole digger?
Post hole diggers are versatile tools that find application in various projects and tasks that involve digging holes. Here are some examples of projects or applications that commonly require the use of a post hole digger:
- Fence Installation: When installing fences, post hole diggers are essential for digging holes to secure the fence posts. Whether it’s a wooden, metal, or vinyl fence, a post hole digger allows for precise and consistent hole digging, ensuring the stability and longevity of the fence.
- Deck or Patio Construction: Building a deck or patio often involves setting support posts into the ground. Post hole diggers are used to excavate holes for these posts, ensuring that they are properly anchored and provide a solid foundation for the structure.
- Signage or Street Lighting Installation: In projects involving the installation of signage, street lights, or other outdoor fixtures, post hole diggers are employed to dig holes for the supporting posts. This ensures that the signs or lights are securely mounted and can withstand external forces and weather conditions.
- Landscaping and Gardening: Post hole diggers are useful for various landscaping and gardening tasks. They can be used to dig holes for planting trees, shrubs, or large plants, allowing for proper root growth and stability. Additionally, post hole diggers are employed in installing garden trellises, arbors, or pergolas.
- Flagpole Installation: When erecting flagpoles, post hole diggers are utilized to dig the holes for the flagpole base. This ensures that the flagpole stands upright and remains stable, even in windy conditions.
- Foundation Repair: In certain foundation repair projects, post hole diggers are employed to excavate holes around the foundation for the installation of support piers or foundation underpinning. These holes allow access to the foundation, facilitating the repair or reinforcement process.
- Utility Pole Placement: Post hole diggers are commonly used in utility pole installation, where holes need to be dug to accommodate the poles. This is crucial for the installation of power lines, telephone lines, or other utility infrastructure.
- Building Construction: Post hole diggers play a role in various construction projects, such as the installation of structural supports for small buildings, sheds, or pergolas. They are used to dig holes for the support posts, ensuring a stable and secure structure.
These examples demonstrate the diverse range of projects and applications where post hole diggers are essential tools. Whether it’s for residential, commercial, or industrial purposes, post hole diggers enable efficient and accurate hole digging, contributing to the successful completion of various construction, landscaping, and installation projects.
What safety precautions should be followed when using a post hole digger?
When using a post hole digger, it is essential to prioritize safety to prevent accidents or injuries. Adhering to proper safety precautions ensures the well-being of the operator and anyone in the vicinity. Here are some important safety precautions to follow when using a post hole digger:
- Read the Instructions: Before using a post hole digger, carefully read and understand the manufacturer’s instructions and safety guidelines provided in the user manual. Familiarize yourself with the specific operating procedures, recommended safety equipment, and any limitations or precautions associated with the digger.
- Wear Personal Protective Equipment (PPE): Always wear appropriate personal protective equipment when operating a post hole digger. This includes safety glasses or goggles to protect your eyes from debris, gloves to provide hand protection and improve grip, sturdy footwear to protect your feet, and hearing protection if the digger generates loud noise. PPE helps minimize the risk of injuries and enhances operator safety.
- Inspect the Digger: Before each use, inspect the post hole digger for any signs of damage, wear, or loose components. Check the handles, blades, auger, and fasteners to ensure they are in good condition and properly secured. Any damaged or worn parts should be repaired or replaced before operating the digger.
- Clear the Work Area: Clear the work area of any obstacles, debris, or tripping hazards before using the post hole digger. Remove rocks, branches, or other objects that could interfere with the digging process or cause accidents. Maintain a safe distance from bystanders or other workers in the vicinity to prevent accidental contact or injury.
- Call Utility Companies: Before digging, contact the relevant utility companies to identify the location of underground utilities such as gas lines, water pipes, or electrical cables. This helps prevent accidental damage to utility lines, which can pose serious safety risks. Follow any guidelines provided by utility companies for safe digging practices in proximity to their infrastructure.
- Use Proper Digging Techniques: Follow the recommended digging techniques provided by the manufacturer. Use controlled and steady movements to dig the hole, avoiding sudden or jerky motions. Do not force the digger beyond its capabilities or apply excessive pressure, as this can lead to instability or damage to the digger. Pace yourself and take breaks as needed to prevent fatigue.
- Watch for Underground Hazards: While digging, be vigilant for underground hazards that may not be visible, such as tree roots, rocks, or buried debris. These obstacles can cause the digger to become unstable or abruptly stop, leading to accidents or injuries. If you encounter any unexpected resistance or obstruction, stop digging and inspect the area before proceeding.
- Store Safely: After use, store the post hole digger in a safe and secure location, out of the reach of children or unauthorized users. Store it in an upright position or as recommended by the manufacturer to prevent accidental tripping or damage. Proper storage ensures that the digger remains in good condition and reduces the risk of accidents during handling or retrieval.
- Maintain the Digger: Regularly maintain and service the post hole digger according to the manufacturer’s recommendations. This includes cleaning, lubricating moving parts, inspecting for wear or damage, and replacing any worn or damaged components. Well-maintained equipment operates more safely and efficiently, reducing the risk of accidents.
By following these safety precautions, operators can minimize the risk of accidents or injuries when using a post hole digger. Prioritizing safety through proper equipment usage, wearing appropriate PPE, inspecting the digger, clearing the work area, identifying underground utilities, using proper digging techniques, watching for hazards, storing the digger safely, and maintaining the equipment ensures a safer working environment and promotes responsible operation.
How do motorized post hole diggers compare to manual ones in terms of efficiency?
Motorized post hole diggers, such as gas-powered or electric-powered augers, offer several advantages over manual post hole diggers in terms of efficiency. Here are some key points of comparison:
- Digging Speed: Motorized post hole diggers are generally much faster than manual ones. The power source, whether it be a gas engine or an electric motor, provides rotational force to the auger blades, allowing them to penetrate the ground quickly. This increased speed can significantly reduce the time and effort required to dig a hole, especially in challenging soil conditions.
- Physical Effort: Manual post hole diggers require significant physical exertion from the operator. The operator needs to apply downward force and twist the digger to dig into the ground. In contrast, motorized diggers eliminate or greatly reduce the need for physical effort. The power source does the work of driving the auger into the ground, requiring minimal physical exertion from the operator.
- Consistency: Motorized post hole diggers tend to provide more consistent digging results compared to manual ones. The power-driven rotation of the auger blades ensures a steady and uniform digging motion. This consistency helps in achieving consistent hole diameter and depth, which is particularly important when installing posts or other structures that require precise measurements.
- Handling Challenging Soils: Motorized post hole diggers are often better equipped to handle challenging soil conditions. They can tackle compacted soil, rocky terrain, or dense clay with greater ease than manual diggers. The power-driven auger blades can exert more force and overcome resistance, making it possible to dig in soils that may be difficult or impossible to dig with a manual digger.
- Large-Scale Projects: Motorized post hole diggers are especially advantageous for large-scale projects that involve digging multiple holes or digging deep holes. The efficiency and speed of motorized diggers allow operators to complete the work more quickly and effectively, saving time and labor costs compared to using manual diggers.
While motorized post hole diggers offer greater efficiency and convenience, it’s important to note that they may come with higher costs and maintenance requirements compared to manual diggers. Additionally, manual diggers can be more suitable for smaller projects or situations where physical effort is not a concern.
In summary, motorized post hole diggers outperform manual ones in terms of speed, physical effort, consistency, handling challenging soils, and large-scale projects. However, the choice between the two depends on the specific needs, project scale, and budget constraints.
editor by CX 2024-04-15
China Good quality Excavator Drilling Ground Hole Drill Auger with High Quality pto shaft adapter
Product Description
Product Description
KINGER earth auger application in Landscaping, Tree planting, Well boring, Foundation piles, Screw pile installations, Ground
source heat pumps, Pole and Mast Installations, Solar energy piling, Bridge pier drilling etc.
Features of KINGER Hydraulic Earth Auger Drill:
1.Huge range of earth drill to suit 1-50T excavators.
2.High quality Imported Hydraulic motors.
3.Heavy duty Planetary Reductions Gearbox with massive Diameter Output Bearing, Specially researched Gearbox design and
heat-treating skills to make auger with massive torque.
4. Non-dislodgement output shaft.
5.Specially designed auger flight for more earth removal.
Application
Product Parameters
Earth Drive Parameter | |||||||||||||
Model | YDH mini | YDH12 | |||||||||||
Oil Pressure Range (bar) | 80-200 | 100-240 | 100-240 | 150-240 | 150-240 | 100-210 | 100-210 | 200-350 | 200-350 | 200-350 | 200-350 | 200-350 | 200-350 |
Oil Flow Range (Lpm) | 50-95 | 80-150 | 80-150 | 100-170 | 100-170 | 100-170 | 100-170 | 120-200 | 120-200 | 120-200 | 120-250 | 150-300 | 150-300 |
Speed Range (r/min) | 12-26 | 22-47 | 20-45 | 20-35 | 15-28 | 15-22 | 13-20 | 14-22 | 11-19 | 11-19 | 10-18 | 7-15 | 5-12 |
Output shaft (mm) | 75Sq | 75Sq | 75Sq | 95Sq | 95Sq | 110Sq | 110Sq | 110Sq | 110Sq | 110Sq | 110Sq | 150Sg | 150Sg |
Unit Size (mm) | φ270X870 | φ290X945 | φ290X945 | φ345X1155 | φ345X155 | φ450X1300 | φ450X1300 | φ500X1400 | φ500X1400 | φ500X1400 | φ500X1400 | φ740X1950 | φ740X1950 |
Unit Weight (kg) | 124 | 172 | 175 | 275 | 278 | 485 | 490 | 660 | 670 | 680 | 705 | 1865 | 1905 |
Certifications
Packaging & Shipping
Company Profile
HangZhou Xihu (West Lake) Dis.CHINAMFG Machinery Co.,Ltd.,was founded in 2571.Our main business include Earth auger, Log splitter, Break hammer and other attachment for excavator.
As a manufacturer,we own the professional R&D team and we have the most complete series of models in China.
Quality is our culture.We will not attract customers’ attention with low price. We insist on quality first,We provide products with high cost performance.
Trust you will like our quality,services if you buy 1 sample from us.
We have created our own brand “KINGER”. Our product has been exported to Germany, Denmark, Russia, Australia, Malaysia, Canada, United States and other countries and has been widely recognized by customers all over the world.
FAQ
Q: Are you a manufacturer?
A: Yes, We are an enterprise integrating research, development, production and sales.
Q: Are you sure that your products will fit my excavator?
A: Our drills can be adapted to different excavators. Show me your model number, and we can give you best solution.
Q:How to choose the correct model?
A:First of all, we need to know the model and tonnage of the excavator.
Second, we need to know the diameter and depth of the hole to be drilled.
Then, we need to know the working environment and the soil.
Finally, please tell us your desired speed and other requirements.
Q:What is the suitable soil for the drill?
A:Ordinary soil, Sandy soil, Clay, Land waste, Frozen earth, Backfill.
Exhibition
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
After-sales Service: | Online Support Available |
---|---|
Warranty: | 18months |
Certification: | CE, ISO9001:2015 |
Condition: | New |
Drill Hole Diameter: | 100mm – 1200mm |
Drill Hole Depth: | 1m – 30m |
Customization: |
Available
| Customized Request |
---|
Can you provide examples of projects or applications that require a post hole digger?
Post hole diggers are versatile tools that find application in various projects and tasks that involve digging holes. Here are some examples of projects or applications that commonly require the use of a post hole digger:
- Fence Installation: When installing fences, post hole diggers are essential for digging holes to secure the fence posts. Whether it’s a wooden, metal, or vinyl fence, a post hole digger allows for precise and consistent hole digging, ensuring the stability and longevity of the fence.
- Deck or Patio Construction: Building a deck or patio often involves setting support posts into the ground. Post hole diggers are used to excavate holes for these posts, ensuring that they are properly anchored and provide a solid foundation for the structure.
- Signage or Street Lighting Installation: In projects involving the installation of signage, street lights, or other outdoor fixtures, post hole diggers are employed to dig holes for the supporting posts. This ensures that the signs or lights are securely mounted and can withstand external forces and weather conditions.
- Landscaping and Gardening: Post hole diggers are useful for various landscaping and gardening tasks. They can be used to dig holes for planting trees, shrubs, or large plants, allowing for proper root growth and stability. Additionally, post hole diggers are employed in installing garden trellises, arbors, or pergolas.
- Flagpole Installation: When erecting flagpoles, post hole diggers are utilized to dig the holes for the flagpole base. This ensures that the flagpole stands upright and remains stable, even in windy conditions.
- Foundation Repair: In certain foundation repair projects, post hole diggers are employed to excavate holes around the foundation for the installation of support piers or foundation underpinning. These holes allow access to the foundation, facilitating the repair or reinforcement process.
- Utility Pole Placement: Post hole diggers are commonly used in utility pole installation, where holes need to be dug to accommodate the poles. This is crucial for the installation of power lines, telephone lines, or other utility infrastructure.
- Building Construction: Post hole diggers play a role in various construction projects, such as the installation of structural supports for small buildings, sheds, or pergolas. They are used to dig holes for the support posts, ensuring a stable and secure structure.
These examples demonstrate the diverse range of projects and applications where post hole diggers are essential tools. Whether it’s for residential, commercial, or industrial purposes, post hole diggers enable efficient and accurate hole digging, contributing to the successful completion of various construction, landscaping, and installation projects.
Can post hole diggers be adapted for use in both residential and commercial projects?
Yes, post hole diggers are versatile tools that can be adapted for use in both residential and commercial projects. Their design, features, and capabilities make them suitable for a wide range of applications, regardless of the scale or nature of the project. Here are some reasons why post hole diggers can be effectively used in both residential and commercial projects:
- Size Options: Post hole diggers are available in various sizes to accommodate different project requirements. They come in compact, lightweight versions ideal for residential use, as well as larger, heavy-duty models suitable for commercial projects. The availability of different size options ensures that post hole diggers can be matched to the specific needs of the project, whether it’s a small backyard fence installation or a large-scale commercial construction project.
- Adjustable Depth and Diameter: Many post hole diggers feature adjustable depth and diameter capabilities. This adaptability allows users to customize the digging parameters based on the specific project requirements. Whether it’s digging shallow holes for residential fence posts or deeper holes for commercial applications such as signposts or structural supports, post hole diggers can be adjusted to meet the desired depth and diameter specifications.
- Soil Compatibility: Post hole diggers are designed to handle various soil types commonly encountered in both residential and commercial projects. They can effectively dig holes in soil compositions such as clay, loam, gravel, or sandy soils. This versatility ensures that post hole diggers can be used in different geographical locations, whether it’s a residential backyard or a commercial construction site.
- Portability: Post hole diggers are generally designed to be portable and easy to transport. They can be maneuvered and operated in different project locations, whether it’s a residential property or a commercial worksite. The portability of post hole diggers allows for flexibility and convenience in tackling various projects, making them suitable for both residential and commercial applications.
- Efficiency and Time Savings: In both residential and commercial projects, efficiency and time savings are essential. Post hole diggers offer significant advantages in this regard. Their mechanical action, whether manual or powered, allows for faster and more efficient digging compared to manual methods. This translates to time savings and increased productivity, benefiting both residential homeowners and commercial contractors.
- Multiple Applications: Post hole diggers have multiple applications beyond residential or commercial projects. They can be utilized in various industries such as agriculture, landscaping, and construction. Their versatility makes them valuable tools for tasks like planting trees, installing poles, erecting signs, or setting up outdoor structures. This wide range of applications further highlights the adaptability of post hole diggers across different project types and sectors.
Overall, post hole diggers can be effectively adapted for use in both residential and commercial projects. Their size options, adjustable depth and diameter capabilities, soil compatibility, portability, efficiency, time savings, and multiple applications make them versatile tools that can tackle a wide range of projects, regardless of the residential or commercial context.
What is a post hole digger and how does it work?
A post hole digger is a tool used to manually or mechanically dig holes in the ground for various purposes, such as installing fence posts, signposts, or planting trees. It consists of a long shaft with handles at the top and a digging mechanism at the bottom.
The digging mechanism of a post hole digger typically consists of two sharp metal blades or scoops, known as augers, attached to the bottom of the shaft. The augers are shaped like spirals to help drive them into the ground and remove soil from the hole.
When using a manual post hole digger, the operator positions the blades at the desired location and pushes the handles downward. The downward force combined with a twisting motion allows the augers to penetrate the soil. The operator then lifts the digger out of the hole, bringing the loosened soil to the surface. The process is repeated until the desired depth is reached.
For larger or more challenging digging tasks, there are also mechanical post hole diggers available. These tools are often powered by gas engines or electric motors. Mechanized post hole diggers operate similarly to manual ones, but the power source provides the necessary force to drive the augers into the ground more easily and quickly.
Post hole diggers come in various sizes to accommodate different hole diameters and depths. The size of the augers determines the width of the hole, while the length of the shaft determines the depth that can be achieved.
In summary, a post hole digger is a tool used for digging holes in the ground. It works by using sharp augers to penetrate and remove soil, either through manual force or with the assistance of a power source in the case of mechanical diggers.
editor by CX 2024-03-11
China factory Full Hydraulic 0.91cbm Bucket 21t Wheel Excavator pto shaft adapter tractor supply
Product Description
Full Hydraulic 0.91cbm Bucket 21t Wheel Excavator
Our company will offer you the high quality products with a low price, quick delivery,and professional after-sale service.
HangZhou CHINAMFG Machinery CO., LTD
HangZhou CHINAMFG Machinery CO., LTD
Full Hydraulic 0.91cbm Bucket 21t Wheel Excavator
Specifications | Unit | XE215C |
Operation Weight | kg | 21900 |
Buket Capacity | m³ | 0.9~1.0 |
Engiee Model | CC-6BG1TRP | |
Output power | kw/rpm | 128.5/2100 |
Tonque/speed | N.m/rpm | 637/1800 |
Displacement | L | 6.494 |
Travel speed(H/L) | km/h | 5.5/3.3 |
Ground pressure | kPa | 47.2 |
Bucket CHINAMFG force | kN | 149 |
Arm CHINAMFG force | kN | 111 |
Max. traction | kN | 184 |
Fuel tank capacity | L | 400 |
Engine oil capacity | L | 25 |
Hydraulic tank capacity | L | 220 |
Overall length | mm | 9625 |
Overall width | mm | 2990 |
Overall height | mm | 3100 |
Crawler gauge | mm | 2390 |
Max. CHINAMFG height | mm | 9620 |
Max. dumping height | mm | 6780 |
Max. CHINAMFG depth | mm | 6680 |
Full Hydraulic 0.91cbm Bucket 21t Wheel Excavator
XE215C is suitable for earth and stone construction projects such as municipal construction, highway bridges, housing construction, road engineering, farmland water conservancy construction, port construction and so on, it has features of good flexibility and maneuverabiliity, low fuel consumption, high construction efficiency, large CHINAMFG force, comfortable driving environment and wide range of application.
1,The overall layout and the axle load distribution are more reasonable to achieve better traveling stability and the maximum traveling speed is up to 40km/h to realize faster site transfer speed.
2,The domestic leading hydraulic system distribution technology features high energy-saving and efficiency.
3,The highest breakout force on the loading end is leading the industry by 15%~20% compared with like models.
4,The advanced structure and hinge points on the CHINAMFG end and the industry’s largest rotating angle of the bucket ensure strong soil holding capacity.
HangZhou CHINAMFG Machinery CO., LTD
MULTIPLE SHIPPING WAYS TO SAVE SHIPPING FREIGHT FOR YOU
WHY CHOOSE US?
Experience
10 years experience of production,sales,research and development in the field of special trucks.
Specialization
We can produce according to your demand, the material,the size, the color and the logo is optional for you.
Good quality
Has CHINAMFG technology, advanced equipments ;Reliant quality and flexible modes of operation also have strict quality control system and passed the iso9001-2008 and the 3c (china compulsory certification),with SGS,BV certifcate as well.
Chassis supply
We have a very good long term cooperation relationship with chassis manufacturer, Such as SINOTRUK, BEIBEN, FAW, FOTON, SHACMAN, SHXIHU (WEST LAKE) DIS.I, CIMC, XIHU (WEST LAKE) DIS.FENG and so on.
HangZhou CHINAMFG Machinery CO., LTD
OUR SERVICE
(1) More than 300 workers ,large and advanced production;
(2) Have professional engineer,can offer the best solutions;
(3) With keeping good relation with SINOTRUK, FOTON, DFAC, FOTON, CHINAMFG chassis factory.
(4) Build strict QC team to guarantee the quality;
(5) Own good sales team, can offer warm follow-up service.
(6) Spare Parts Supply:
We have our own spear parts departments,have strong production and distribution capability. We can satisfy your demand within 2-7 days. We always do our best to solve the problems, and put our customers’ interests in the first place. And We can Supply Spare Parts For Many Brands, Such as SINOTRUK, BEIBEN, FAW, FOTON, SHACMAN, SHXIHU (WEST LAKE) DIS.I, CIMC, XIHU (WEST LAKE) DIS.FENG and so on.
HangZhou CHINAMFG Machinery CO., LTD
FAQ
1, How to purchase the trailer truck from your company?
You can choose the model from our website, also you can tell our sales manger your specific requirements and we will recommend the suitable model to you. After confirming the model and price, we can CHINAMFG the contract.
2,How to ensure product quality?
Firstly,we passed the international quality system certification. Secondly, Made in China Group has conducted field certification for our factory. Finally,You can entrust third party individuals or organizations to inspect our products before delivery.
3, How to visit your factory?
After you arriving at China, you can fly to HangZhou airport. HangZhou airport is located in HangZhou City, ZheJiang Province. Our driver will meet you at HangZhou airport and take you to our factory by car.
WELCOME TO CONTACT US
If you are interested in any of construction machinery for sale,please feel free to contact me. Also, welcome to China and visit our construction machinery factory for construction machinery price or to discuss more details.
HangZhou CHINAMFG Machinery CO., LTD
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Type: | Crawler Excavator |
---|---|
Usage: | Mining Excavator, GM Excavator |
Bucket: | Shovel |
Transmission: | Hydraulic Transmission |
Drive Type: | Internal Combustion Drive |
Bucket Capacity: | 0.5~1.0m³ |
Customization: |
Available
| Customized Request |
---|
What maintenance practices are essential for prolonging the lifespan of a post hole digger?
Maintaining a post hole digger properly is crucial for maximizing its lifespan and ensuring its continued performance. Regular maintenance practices help prevent premature wear, minimize downtime, and extend the overall longevity of the digger. Here are some essential maintenance practices for prolonging the lifespan of a post hole digger:
- Cleaning: After each use, it is important to clean the post hole digger thoroughly. Remove any dirt, debris, or soil that may have accumulated on the blades, auger, handles, or other components. Use a brush or hose to remove stubborn dirt. Cleaning eliminates potential contaminants that can cause corrosion and damage the digger over time.
- Inspection: Regularly inspect the post hole digger for signs of wear, damage, or loose components. Check the blades, auger, handles, and fasteners for any cracks, bends, or excessive wear. Ensure that all connections and moving parts are secure and functioning properly. Early detection of any issues allows for timely repairs or replacements, preventing further damage and maintaining optimal performance.
- Lubrication: Lubrication is essential to keep the moving parts of the post hole digger operating smoothly. Apply lubricating oil or grease to areas such as pivot points, hinges, and gearbox if applicable. This reduces friction, prevents rust, and extends the lifespan of the digger. Follow the manufacturer’s recommendations regarding the type and frequency of lubrication.
- Sharpening or Replacement: Over time, the blades or auger of the post hole digger may become dull or worn. Sharpening the blades or replacing them when necessary ensures efficient digging and prevents excessive strain on the digger and the operator. Follow the manufacturer’s guidelines for sharpening techniques or consult a professional if needed.
- Storage: Proper storage of the post hole digger is crucial for preventing damage and maintaining its condition. Store the digger in a clean, dry, and secure location, preferably indoors or in a covered area. Protect the blades and auger from moisture, which can cause rust. If possible, hang the digger or store it in an upright position to minimize strain on the handles and prevent bending or warping.
- Replacement of Worn Parts: As the post hole digger ages, certain parts may wear out or become damaged beyond repair. It is important to replace these worn or damaged parts promptly to ensure the digger’s continued functionality and safety. Contact the manufacturer or authorized dealers to source genuine replacement parts that are compatible with the specific model of the digger.
- Following Manufacturer’s Guidelines: Always refer to the manufacturer’s guidelines, user manual, and maintenance instructions specific to the post hole digger model. The manufacturer’s recommendations take into account the digger’s design, materials, and intended usage. Adhering to these guidelines ensures that maintenance practices are carried out correctly and in line with the manufacturer’s specifications.
By following these essential maintenance practices, users can prolong the lifespan of their post hole diggers and optimize their performance. Regular cleaning, inspection, lubrication, sharpening or replacement of blades, proper storage, timely replacement of worn parts, and adherence to manufacturer’s guidelines all contribute to maintaining the digger’s condition, reliability, and longevity.
How do post hole diggers ensure controlled and precise digging in tight spaces?
Post hole diggers are equipped with various features and techniques to ensure controlled and precise digging in tight spaces. These elements allow users to navigate limited areas and maintain accuracy during the digging process. Here’s how post hole diggers achieve controlled and precise digging in tight spaces:
- Compact Design: Post hole diggers are designed to be compact and maneuverable. They typically have a narrow frame and a slim profile, allowing them to fit into tight spaces where larger machinery or tools may not have access. The compact design enables operators to position the digger accurately and maintain control while digging in confined areas.
- Shorter Shaft Length: Some post hole diggers feature shorter shaft lengths compared to standard models. The shorter shaft allows for better control and maneuverability in tight spaces. By reducing the overall length of the digger, operators can more easily navigate around obstacles and maintain precise digging movements without compromising stability.
- Adjustable Handle Positions: Many post hole diggers have adjustable handle positions. The handles can be repositioned or rotated to suit the operator’s preference and the specific requirements of the tight space. By adjusting the handle position, operators can maintain a comfortable grip and optimize control while working in confined areas.
- Operator Technique: The technique employed by the operator is crucial in achieving controlled and precise digging in tight spaces. Skilled operators can utilize specific techniques such as careful hand placement, controlled force application, and precise movements to navigate around obstacles and maintain accuracy. With practice and experience, operators can adapt their technique to the limitations of tight spaces, ensuring controlled and precise digging.
- Graduated Markings or Measurements: Some post hole diggers feature graduated markings or measurements on the shaft or handle. These markings serve as visual references for the operator, allowing them to monitor the depth and progress of the hole while working in tight spaces. By referring to the measurements, operators can ensure consistent and precise digging depths, even in limited areas.
- Manual Control: Manual post hole diggers offer a high level of manual control, which can be advantageous in tight spaces. By physically operating the digger and exerting force directly, operators have fine control over the speed, direction, and depth of the digging process. The ability to make subtle adjustments on the spot enables controlled and precise digging, particularly in areas where precision is critical.
Through their compact design, shorter shaft lengths, adjustable handle positions, emphasis on operator technique, graduated markings or measurements, and manual control, post hole diggers ensure controlled and precise digging in tight spaces. These features and techniques allow operators to navigate around obstacles, maintain accuracy, and achieve the desired hole dimensions even when working in confined areas.
What are the key components of a manual post hole digger?
A manual post hole digger consists of several key components that work together to facilitate the digging process. Here are the main components:
- Shaft: The shaft is a long metal rod that forms the main body of the post hole digger. It provides the structural support and stability while digging. The shaft is typically made of steel or another durable material to withstand the forces exerted during digging.
- Handles: At the top of the shaft, there are two handles positioned opposite each other. The handles are designed for the operator to grip and apply downward force while digging. They provide leverage and control, allowing the operator to maneuver the post hole digger effectively.
- Auger Blades: The auger blades are the cutting or digging elements of the post hole digger. They are attached to the bottom end of the shaft and are responsible for penetrating the ground and removing soil. Auger blades are typically made of hardened steel to withstand the abrasive nature of soil and provide durability.
- Blade Spacing: The spacing between the two auger blades is an important aspect of a manual post hole digger. It determines the width of the hole being dug. The blade spacing can vary depending on the specific model or intended use of the digger.
- Twist or Spiral Design: The auger blades are shaped in a twist or spiral pattern. This design allows them to efficiently move through the soil as they rotate. The twisting motion helps break up the soil and facilitates the removal process.
- Blade Point: The bottom end of each auger blade usually comes to a sharp point. This point helps initiate the penetration into the ground, allowing the blades to start digging and create a hole.
When using a manual post hole digger, the operator grips the handles, positions the auger blades at the desired location, and applies downward force while simultaneously twisting the digger. This action drives the blades into the ground, loosening the soil. The operator then lifts the digger out of the hole, bringing the loosened soil to the surface.
By understanding the key components and their functions, operators can effectively utilize a manual post hole digger to dig holes for various purposes.
editor by CX 2024-02-10
China OEM Digger pto shaft adapter
Product Description
The Post hole digger series are simple to operate,; safe and reliable,; efficient,; and easy to maintenance.; They are suitable for the different situations,; such as sand,; hard land,; etc.; They are the ideal machines for afforestation.; They match 20-80 HP tractors.;
Model | 1WX-230 | 1WX-300 | 1WX-400 | 1WX-500 | 1WX-600 | 1WX-700 |
Overall size(cm); | 230*80*165 | 230*80*165 | 230*80*165 | 230*80*165 | 230*80*165 | 230*80*165 |
Drill diameter(mm); | 230 | 300 | 400 | 500 | 600 | 600 |
Working depth(cm); | 40-70 | 40-70 | 40-70 | 50-80 | 50-80 | 50-80 |
Match power(Hp); | 15-45 | 18-50 | 20-60 | 25-75 | 30-80 | 35-90 |
Weight(kg); | 150 | 165 | 230 | 245 | 255 | 265 |
Linkage | 3-pointed linkage | 3-pointed linkage | 3-pointed linkage | 3-pointed linkage | 3-pointed linkage | 3-pointed linkage |
PTO speed(rpm); | 540 | 540 | 2.;18:;1(when PTO speed is 540rpms);,; 3:;1(when PTO speed is 720 or 760rpms); |
2.;18:;1(when PTO speed is 540rpms);,; 3:;1(when PTO speed is 720 or 760rpms); |
2.;18:;1(when PTO speed is 540rpms);,; 3:;1(when PTO speed is 720 or 760rpms); |
2.;18:;1(when PTO speed is 540rpms);,; 3:;1(when PTO speed is 720 or 760rpms); |
Efficiency(hole/hour); | 60-150 | 60-150 | 60-120 | 60-120 | 60-120 | 30-60 |
Transport clearance | >30cm | >30cm | >30cm | >30cm | >30cm | >30cm |
Material of Drill | 65Mn | 65Mn | 65Mn | 65Mn | 65Mn | 65Mn |
FOB HangZhou(USD); | 608 | 640 | 655 | 670 | 688 | 705 |
Type: | Digger |
---|---|
Usage: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying |
Power Source: | Tractor |
Model: | 1wx-230-700 |
Drill Diameter(Mm): | 230-700 |
Working Depth(Cm): | 40-80 |
Customization: |
Available
| Customized Request |
---|
What maintenance practices are essential for prolonging the lifespan of a post hole digger?
Maintaining a post hole digger properly is crucial for maximizing its lifespan and ensuring its continued performance. Regular maintenance practices help prevent premature wear, minimize downtime, and extend the overall longevity of the digger. Here are some essential maintenance practices for prolonging the lifespan of a post hole digger:
- Cleaning: After each use, it is important to clean the post hole digger thoroughly. Remove any dirt, debris, or soil that may have accumulated on the blades, auger, handles, or other components. Use a brush or hose to remove stubborn dirt. Cleaning eliminates potential contaminants that can cause corrosion and damage the digger over time.
- Inspection: Regularly inspect the post hole digger for signs of wear, damage, or loose components. Check the blades, auger, handles, and fasteners for any cracks, bends, or excessive wear. Ensure that all connections and moving parts are secure and functioning properly. Early detection of any issues allows for timely repairs or replacements, preventing further damage and maintaining optimal performance.
- Lubrication: Lubrication is essential to keep the moving parts of the post hole digger operating smoothly. Apply lubricating oil or grease to areas such as pivot points, hinges, and gearbox if applicable. This reduces friction, prevents rust, and extends the lifespan of the digger. Follow the manufacturer’s recommendations regarding the type and frequency of lubrication.
- Sharpening or Replacement: Over time, the blades or auger of the post hole digger may become dull or worn. Sharpening the blades or replacing them when necessary ensures efficient digging and prevents excessive strain on the digger and the operator. Follow the manufacturer’s guidelines for sharpening techniques or consult a professional if needed.
- Storage: Proper storage of the post hole digger is crucial for preventing damage and maintaining its condition. Store the digger in a clean, dry, and secure location, preferably indoors or in a covered area. Protect the blades and auger from moisture, which can cause rust. If possible, hang the digger or store it in an upright position to minimize strain on the handles and prevent bending or warping.
- Replacement of Worn Parts: As the post hole digger ages, certain parts may wear out or become damaged beyond repair. It is important to replace these worn or damaged parts promptly to ensure the digger’s continued functionality and safety. Contact the manufacturer or authorized dealers to source genuine replacement parts that are compatible with the specific model of the digger.
- Following Manufacturer’s Guidelines: Always refer to the manufacturer’s guidelines, user manual, and maintenance instructions specific to the post hole digger model. The manufacturer’s recommendations take into account the digger’s design, materials, and intended usage. Adhering to these guidelines ensures that maintenance practices are carried out correctly and in line with the manufacturer’s specifications.
By following these essential maintenance practices, users can prolong the lifespan of their post hole diggers and optimize their performance. Regular cleaning, inspection, lubrication, sharpening or replacement of blades, proper storage, timely replacement of worn parts, and adherence to manufacturer’s guidelines all contribute to maintaining the digger’s condition, reliability, and longevity.
Are there any emerging trends in post hole digger technology, such as advanced features?
Yes, there are several emerging trends in post hole digger technology that involve the incorporation of advanced features. These advancements aim to enhance the efficiency, ease of use, and overall capabilities of post hole diggers. Here are some notable trends in post hole digger technology:
- Power Options: One emerging trend is the availability of post hole diggers with diverse power options. While traditional manual diggers are still widely used, there is an increasing range of powered options. Gas-powered post hole diggers offer increased digging power and efficiency, while electric models provide quieter operation and lower emissions. Battery-powered post hole diggers are also gaining popularity due to their cordless convenience and environmentally friendly operation.
- Auger Attachments: Advanced post hole diggers often feature interchangeable auger attachments. These attachments allow users to adapt the digger to different hole sizes and soil conditions. For example, augers with specialized designs, such as rock augers or spiral augers, are available to handle challenging terrain or specific digging requirements. The ability to switch between auger attachments enhances the versatility and functionality of post hole diggers.
- Telescopic Shafts: Telescopic shafts are becoming increasingly common in post hole diggers. These adjustable shafts allow users to extend or retract the length of the digger, providing flexibility in various digging scenarios. Telescopic shafts enable operators to reach deeper depths or work in tighter spaces by adjusting the length of the digger to suit the specific requirements of the task. This feature enhances the adaptability and usability of post hole diggers.
- Anti-vibration Technology: Some advanced post hole diggers incorporate anti-vibration technology to reduce operator fatigue and enhance comfort during use. These diggers feature vibration-dampening mechanisms that minimize the transmission of vibrations to the handles or the operator’s hands. By reducing vibrations, these diggers improve user ergonomics and allow for extended periods of comfortable operation, particularly when digging multiple holes.
- Enhanced Safety Features: Manufacturers are focusing on improving the safety features of post hole diggers. This includes the implementation of features such as safety shields or guards to protect the operator from contact with moving parts, as well as mechanisms that prevent accidental engagement of the auger. Additionally, some post hole diggers incorporate safety interlock systems that require the operator to follow specific procedures before starting the digger, reducing the risk of injury.
- Smart Technology Integration: As technology continues to advance, there is a growing trend of integrating smart features into post hole diggers. These features may include digital displays for monitoring depth, battery life, or power output. Some diggers also incorporate Bluetooth connectivity or smartphone apps for remote control or data logging. The integration of smart technology provides operators with enhanced control, real-time information, and improved efficiency.
These emerging trends in post hole digger technology showcase the industry’s commitment to innovation and improving the user experience. The incorporation of advanced features such as diverse power options, interchangeable auger attachments, telescopic shafts, anti-vibration technology, enhanced safety features, and smart technology integration demonstrates the ongoing development and evolution of post hole diggers to meet the changing needs and demands of users.
What is a post hole digger and how does it work?
A post hole digger is a tool used to manually or mechanically dig holes in the ground for various purposes, such as installing fence posts, signposts, or planting trees. It consists of a long shaft with handles at the top and a digging mechanism at the bottom.
The digging mechanism of a post hole digger typically consists of two sharp metal blades or scoops, known as augers, attached to the bottom of the shaft. The augers are shaped like spirals to help drive them into the ground and remove soil from the hole.
When using a manual post hole digger, the operator positions the blades at the desired location and pushes the handles downward. The downward force combined with a twisting motion allows the augers to penetrate the soil. The operator then lifts the digger out of the hole, bringing the loosened soil to the surface. The process is repeated until the desired depth is reached.
For larger or more challenging digging tasks, there are also mechanical post hole diggers available. These tools are often powered by gas engines or electric motors. Mechanized post hole diggers operate similarly to manual ones, but the power source provides the necessary force to drive the augers into the ground more easily and quickly.
Post hole diggers come in various sizes to accommodate different hole diameters and depths. The size of the augers determines the width of the hole, while the length of the shaft determines the depth that can be achieved.
In summary, a post hole digger is a tool used for digging holes in the ground. It works by using sharp augers to penetrate and remove soil, either through manual force or with the assistance of a power source in the case of mechanical diggers.
editor by CX 2024-01-09
China manufacturer CHINAMFG Sy210c 20 Ton Wholesale Mining Excavators Chinese Supplier pto shaft adapter tractor supply
Product Description
SY210C 21 ton excavator features strengthened structure, undercarriage and components, making it very robust and reliable. Low maintenance cost and high fuel efficiency of the SY210C medium excavator help customers make more profit.
Advanced Dynamic Control
High Profitability
Remote Monitoring System
Stable and Reliable
Engine model | Cummins BT5.9-140C |
Rated power | 104/2000 kW/rpm |
Emission standard | Tier2 |
Operating weight | 20900kg |
Std. track shoe width | 600mm |
Bucket capacity | 0.93m³ |
Boom length | 5700 mm |
Arm length | 2400 mm |
Construction Cases of CHINAMFG Excavator
Develiery Site of CHINAMFG Excavator
Produce Environment of SANY
Certification of CHINAMFG Excavator
SANY On Exhibition
SANY Company Introduce
SANY has built 25 manufacturing bases, 6 sales regions, and over 100 offices with more than 400 agents and 8,000 suppliers worldwide. In China, CHINAMFG has established 6 industry parks in ZheJiang , HangZhou, ZheJiang , HangZhou, HangZhou and Urumchi. With global R&D centers and manufacturing bases in the US, Germany, India and Brazil, SANY’s products are exported to 150 countries and regions.
FAQ
1: What kind terms of payment can be accepted?
A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted
2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, Gost, EPA(USA)CCC,
3: What about the delivery time?
A: 7-20 days after receiving the deposit.
4: What about the warranty time?
A: 12 months after shipment or 2000 working hours, whichever occuts first.
5. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Type: | Crawler Excavator |
---|---|
Usage: | Special Excavator, Marine Excavator, Mining Excavator |
Bucket: | Backhoe |
Transmission: | Hydraulic Transmission |
Drive Type: | Internal Combustion Drive |
Bucket Capacity: | 0.5~1.0m³ |
Customization: |
Available
| Customized Request |
---|
How do post hole diggers contribute to the efficiency of tasks like deck construction?
Post hole diggers play a vital role in improving the efficiency of tasks like deck construction. They offer several benefits that enhance the overall construction process and expedite the installation of decks. Here are some ways post hole diggers contribute to the efficiency of tasks like deck construction:
- Precise Hole Digging: Post hole diggers allow for precise and consistent hole digging. They are designed to excavate holes of the desired diameter and depth, ensuring accuracy and uniformity in the placement of deck support posts. This precision is crucial for maintaining the structural integrity and alignment of the deck, especially when multiple posts need to be installed.
- Time and Labor Savings: Compared to manual digging methods, post hole diggers significantly reduce the time and physical effort required to excavate holes for deck posts. The mechanical action of the digger, whether it’s a manual or powered model, allows for quicker and more efficient digging, minimizing the need for strenuous manual labor. This time and labor savings translate to increased productivity and faster completion of the deck construction project.
- Consistent Hole Depth: Achieving consistent hole depths is crucial for achieving a level and stable deck structure. Post hole diggers help maintain consistent hole depths by providing depth control features or markings on the digger. This ensures that all the deck support posts are set at the same height, resulting in an even and uniform deck surface.
- Reduced Soil Disruption: Post hole diggers are designed to minimize soil disruption during the digging process. They remove soil from the hole without disturbing the surrounding area excessively. This is particularly important in deck construction, where the integrity of the adjacent ground needs to be preserved to support the overall stability of the deck and prevent soil erosion.
- Ease of Operation: Post hole diggers are designed to be user-friendly and easy to operate. They typically feature ergonomic handles, balanced weight distribution, and intuitive controls. This ease of operation reduces operator fatigue and allows for more efficient and comfortable digging, especially when multiple holes need to be excavated for a deck construction project.
- Versatility: Post hole diggers offer versatility in terms of the types of soil they can handle. They are designed to tackle different soil conditions, including clay, loam, gravel, or sandy soils. This versatility ensures that the digger can efficiently excavate holes in various locations, enabling deck construction in diverse geographical areas.
- Adaptability to Various Deck Designs: Post hole diggers can accommodate different deck designs and configurations. Whether it’s a small backyard deck or a larger multi-level deck, post hole diggers can be used to excavate holes for support posts at the appropriate locations and spacing dictated by the deck design plans. This adaptability streamlines the construction process and facilitates the realization of various deck designs.
By offering precise hole digging, time and labor savings, consistent hole depth, reduced soil disruption, ease of operation, versatility, and adaptability to various deck designs, post hole diggers significantly contribute to the efficiency of tasks like deck construction. They streamline the process, improve productivity, and help ensure the construction of a sturdy, level, and well-aligned deck structure.
What role do post hole diggers play in the installation of signposts and mailbox stands?
Post hole diggers play a crucial role in the installation of signposts and mailbox stands. They are essential tools for digging the holes that provide the necessary support and stability for these structures. Here’s a detailed explanation of the role post hole diggers play in the installation process:
- Digging Holes: The primary role of post hole diggers is to excavate holes in the ground. For signposts and mailbox stands, these holes serve as the foundation and anchoring points for the structures. Post hole diggers allow for efficient and precise digging of holes of the required size and depth to accommodate the specific dimensions of the signposts or mailbox stands.
- Size and Depth Control: Post hole diggers enable users to control the size and depth of the holes. Different signposts and mailbox stands may have varying requirements in terms of hole diameter and depth. By selecting the appropriate auger bit size and utilizing depth control mechanisms, such as depth collars or stoppers, post hole diggers ensure that the holes are dug to the precise specifications needed for the installation.
- Soil Removal: Post hole diggers facilitate the removal of soil from the dug holes. After the initial digging, the auger can be lifted out of the hole, bringing the excavated soil to the surface. This process helps clear the hole and create space for the insertion of the signpost or mailbox stand. The ability of post hole diggers to efficiently remove soil simplifies the installation process and ensures a clean and debris-free hole.
- Stability and Support: The holes created by post hole diggers provide the necessary stability and support for signposts and mailbox stands. Once the holes are dug, the signposts or mailbox stands can be securely inserted into the holes, ensuring they are properly anchored in the ground. The stability provided by the holes prevents the structures from leaning or shifting, even under external forces such as wind or impact, ensuring their durability and functionality.
- Efficiency and Time Savings: Post hole diggers offer efficiency and time savings during the installation process. Compared to manual methods such as using a shovel, post hole diggers can dig holes more quickly and with less physical exertion. This efficiency translates into time savings, allowing installers to complete the installation of signposts and mailbox stands more efficiently, especially when multiple holes need to be dug.
- Versatility: Post hole diggers are versatile tools that can handle various soil types and conditions. Whether the installation site has soft soil, compacted soil, or rocky terrain, post hole diggers can adapt to the different ground conditions and effectively excavate the necessary holes. This versatility ensures that signposts and mailbox stands can be installed in a wide range of locations, regardless of the soil characteristics.
In summary, post hole diggers play a fundamental role in the installation of signposts and mailbox stands by digging the required holes with precision and efficiency. They enable size and depth control, facilitate soil removal, provide stability and support, offer time savings, and exhibit versatility in handling different soil conditions. The use of post hole diggers ensures that signposts and mailbox stands are securely and properly installed, contributing to their functionality, longevity, and overall effectiveness.
What are the key components of a manual post hole digger?
A manual post hole digger consists of several key components that work together to facilitate the digging process. Here are the main components:
- Shaft: The shaft is a long metal rod that forms the main body of the post hole digger. It provides the structural support and stability while digging. The shaft is typically made of steel or another durable material to withstand the forces exerted during digging.
- Handles: At the top of the shaft, there are two handles positioned opposite each other. The handles are designed for the operator to grip and apply downward force while digging. They provide leverage and control, allowing the operator to maneuver the post hole digger effectively.
- Auger Blades: The auger blades are the cutting or digging elements of the post hole digger. They are attached to the bottom end of the shaft and are responsible for penetrating the ground and removing soil. Auger blades are typically made of hardened steel to withstand the abrasive nature of soil and provide durability.
- Blade Spacing: The spacing between the two auger blades is an important aspect of a manual post hole digger. It determines the width of the hole being dug. The blade spacing can vary depending on the specific model or intended use of the digger.
- Twist or Spiral Design: The auger blades are shaped in a twist or spiral pattern. This design allows them to efficiently move through the soil as they rotate. The twisting motion helps break up the soil and facilitates the removal process.
- Blade Point: The bottom end of each auger blade usually comes to a sharp point. This point helps initiate the penetration into the ground, allowing the blades to start digging and create a hole.
When using a manual post hole digger, the operator grips the handles, positions the auger blades at the desired location, and applies downward force while simultaneously twisting the digger. This action drives the blades into the ground, loosening the soil. The operator then lifts the digger out of the hole, bringing the loosened soil to the surface.
By understanding the key components and their functions, operators can effectively utilize a manual post hole digger to dig holes for various purposes.
editor by CX 2024-01-01
China OEM New Durable Agriculture Hydraulic Machinery Equip Mini Excavator pto shaft adapter
Product Description
HX25 mini excavator is designed for small projects which widely used in construction area, agriculture, municipal works, vegetable greenhouse and trench CHINAMFG etc.
With the compact design, it is quite practical in the narrow spaces.Besides, lots of tools can be attached to this product, making its application much extensively.
Main Features: 1) High efficiency and low fuel consumption. 2) Convenient operation, compact design, flexible movement. 3) Adapting to various working conditions like hills and muddy areas. 4) CHINAMFG cast iron counterweight improves working stability. 5) Multi-purpose such as: Excavation, crushing, bulldozing, drilling, grabbing. Applications: |
Technical Parameter | |||
Machine Net Weight: | 2300 Kg | Total Length: | 3600 mm |
Bucket Capacity: | 0.1 m³ | Chassis Length: | 2200 mm |
Engine Power: | 22.1 KW | Width: | 1300 mm |
Rated Speed: | 2200 r/min | Height: | 2300 mm |
Hydraulic System Pressure: | 16 MPa | Platform Turning Radius: | 1270 mm |
Climbing Gradient: | 30° | Crawler Length: | 1890 mm |
Touching Ground Pressure: | 23×10³ N/m² | Clearance to the Ground: | 260 mm |
Walking Speed: | 2 Km/h | Engine Cover Height: | 1390 mm |
Maximum Pulling Force: | 11.5 KN | Platform Clearance to the Ground: | 810 mm |
Platform Turning Speed: | 10 r/min | Crawler Width: | 230 mm |
Working Ranges | |||
A | Max Digging Height | 3400 mm | |
B | Max Dumping Height | 2200 mm | |
C | Max Ground CHINAMFG Radius | 3200 mm | |
D | Min Turning Radius | 2320 mm | |
E | Max CHINAMFG Depth | 2200 mm | |
F | Max CHINAMFG Radius | 4500 mm | |
G | Height | 2300mm |
>>Product Display
>>Replaceable Accessories
ZheJiang CHINAMFG Machinery Co., Ltd, is a reputed manufacturer and exporter of construction machines, farm machines and mine machines with large years’ experience.Located in the capital city HangZhou of ZheJiang province, the company has developed into a comprehensive machinery group.
The products mainly include:Wheel loader, excavator, backhoe loader, skid steer loader, forklift, self-loading concrete mixer and mucking loader etc.Which are widely used in construction, farming, mining and all the related machinery areas.Besides domestic market, the products have also been supplied to numerous places all over the world which has earned large reputation and enjoyed great population.
Since established, the company has been devoted to the scientific and technological innovation, precision manufacturing and all-around service.With all the related certificates, we strictly follow the industry standard, fully control the production flow guaranteeing high quality of every product.We sincerely welcome your visit to reach a mutual success.
>>Our Workshop
Q1.What is the delivery period?
After receiving the initial payment, the goods will be ready for delivery within 5 days.The rest time depends on the distance and transport method which need to be negotiated.
Q2.What is the payment terms can you accept?
30% initial payment, 70% balance payment when the goods are ready for delivery by T/T.
Q3.How long is the product guarantee?
We provide 1 year quality guarantee.
Q4.What kind of service could you provide?
1) Pre-sale service:We could assist you finding the suitable equipment according to your requirement.
2) On-sale service:We strictly follow the commercial rules, contract signing, following the production process, controlling the goods quality, tracking the goods delivery, guaranteeing you receive the qualified goods safely.
3) After-sale service:We provide some consumables with the equipment;
We have operation manual for instructing the basic installation and operation;Video guidance for trouble shooting;Engineers ready for field maintenance and repairing when necessary.
Q5.Can we have the special order like specification change, logo making?
Yes, we accept the customization.We can make it clear in the contract and then our technical start design and production as per your requirement.
For more questions, please free to contact us. We sincerely welcome all friends paying visits to us and reach a mutural success. /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Type: | Crawler Excavator |
---|---|
Usage: | Special Excavator, Marine Excavator, Mining Excavator, GM Excavator, Garden,Farmland,Road Construction |
Bucket: | Backhoe |
Transmission: | Hydraulic Transmission |
Drive Type: | Internal Combustion Drive |
Bucket Capacity: | 0.1m³ |
Customization: |
Available
| Customized Request |
---|
How do post hole diggers contribute to the efficiency of tasks like deck construction?
Post hole diggers play a vital role in improving the efficiency of tasks like deck construction. They offer several benefits that enhance the overall construction process and expedite the installation of decks. Here are some ways post hole diggers contribute to the efficiency of tasks like deck construction:
- Precise Hole Digging: Post hole diggers allow for precise and consistent hole digging. They are designed to excavate holes of the desired diameter and depth, ensuring accuracy and uniformity in the placement of deck support posts. This precision is crucial for maintaining the structural integrity and alignment of the deck, especially when multiple posts need to be installed.
- Time and Labor Savings: Compared to manual digging methods, post hole diggers significantly reduce the time and physical effort required to excavate holes for deck posts. The mechanical action of the digger, whether it’s a manual or powered model, allows for quicker and more efficient digging, minimizing the need for strenuous manual labor. This time and labor savings translate to increased productivity and faster completion of the deck construction project.
- Consistent Hole Depth: Achieving consistent hole depths is crucial for achieving a level and stable deck structure. Post hole diggers help maintain consistent hole depths by providing depth control features or markings on the digger. This ensures that all the deck support posts are set at the same height, resulting in an even and uniform deck surface.
- Reduced Soil Disruption: Post hole diggers are designed to minimize soil disruption during the digging process. They remove soil from the hole without disturbing the surrounding area excessively. This is particularly important in deck construction, where the integrity of the adjacent ground needs to be preserved to support the overall stability of the deck and prevent soil erosion.
- Ease of Operation: Post hole diggers are designed to be user-friendly and easy to operate. They typically feature ergonomic handles, balanced weight distribution, and intuitive controls. This ease of operation reduces operator fatigue and allows for more efficient and comfortable digging, especially when multiple holes need to be excavated for a deck construction project.
- Versatility: Post hole diggers offer versatility in terms of the types of soil they can handle. They are designed to tackle different soil conditions, including clay, loam, gravel, or sandy soils. This versatility ensures that the digger can efficiently excavate holes in various locations, enabling deck construction in diverse geographical areas.
- Adaptability to Various Deck Designs: Post hole diggers can accommodate different deck designs and configurations. Whether it’s a small backyard deck or a larger multi-level deck, post hole diggers can be used to excavate holes for support posts at the appropriate locations and spacing dictated by the deck design plans. This adaptability streamlines the construction process and facilitates the realization of various deck designs.
By offering precise hole digging, time and labor savings, consistent hole depth, reduced soil disruption, ease of operation, versatility, and adaptability to various deck designs, post hole diggers significantly contribute to the efficiency of tasks like deck construction. They streamline the process, improve productivity, and help ensure the construction of a sturdy, level, and well-aligned deck structure.
What safety precautions should be followed when using a post hole digger?
When using a post hole digger, it is essential to prioritize safety to prevent accidents or injuries. Adhering to proper safety precautions ensures the well-being of the operator and anyone in the vicinity. Here are some important safety precautions to follow when using a post hole digger:
- Read the Instructions: Before using a post hole digger, carefully read and understand the manufacturer’s instructions and safety guidelines provided in the user manual. Familiarize yourself with the specific operating procedures, recommended safety equipment, and any limitations or precautions associated with the digger.
- Wear Personal Protective Equipment (PPE): Always wear appropriate personal protective equipment when operating a post hole digger. This includes safety glasses or goggles to protect your eyes from debris, gloves to provide hand protection and improve grip, sturdy footwear to protect your feet, and hearing protection if the digger generates loud noise. PPE helps minimize the risk of injuries and enhances operator safety.
- Inspect the Digger: Before each use, inspect the post hole digger for any signs of damage, wear, or loose components. Check the handles, blades, auger, and fasteners to ensure they are in good condition and properly secured. Any damaged or worn parts should be repaired or replaced before operating the digger.
- Clear the Work Area: Clear the work area of any obstacles, debris, or tripping hazards before using the post hole digger. Remove rocks, branches, or other objects that could interfere with the digging process or cause accidents. Maintain a safe distance from bystanders or other workers in the vicinity to prevent accidental contact or injury.
- Call Utility Companies: Before digging, contact the relevant utility companies to identify the location of underground utilities such as gas lines, water pipes, or electrical cables. This helps prevent accidental damage to utility lines, which can pose serious safety risks. Follow any guidelines provided by utility companies for safe digging practices in proximity to their infrastructure.
- Use Proper Digging Techniques: Follow the recommended digging techniques provided by the manufacturer. Use controlled and steady movements to dig the hole, avoiding sudden or jerky motions. Do not force the digger beyond its capabilities or apply excessive pressure, as this can lead to instability or damage to the digger. Pace yourself and take breaks as needed to prevent fatigue.
- Watch for Underground Hazards: While digging, be vigilant for underground hazards that may not be visible, such as tree roots, rocks, or buried debris. These obstacles can cause the digger to become unstable or abruptly stop, leading to accidents or injuries. If you encounter any unexpected resistance or obstruction, stop digging and inspect the area before proceeding.
- Store Safely: After use, store the post hole digger in a safe and secure location, out of the reach of children or unauthorized users. Store it in an upright position or as recommended by the manufacturer to prevent accidental tripping or damage. Proper storage ensures that the digger remains in good condition and reduces the risk of accidents during handling or retrieval.
- Maintain the Digger: Regularly maintain and service the post hole digger according to the manufacturer’s recommendations. This includes cleaning, lubricating moving parts, inspecting for wear or damage, and replacing any worn or damaged components. Well-maintained equipment operates more safely and efficiently, reducing the risk of accidents.
By following these safety precautions, operators can minimize the risk of accidents or injuries when using a post hole digger. Prioritizing safety through proper equipment usage, wearing appropriate PPE, inspecting the digger, clearing the work area, identifying underground utilities, using proper digging techniques, watching for hazards, storing the digger safely, and maintaining the equipment ensures a safer working environment and promotes responsible operation.
Can you explain the different types of post hole diggers available?
There are several types of post hole diggers available, each designed for specific purposes and varying levels of manual effort. Here are some of the common types:
- Manual Post Hole Digger: This is the most basic type of post hole digger and is operated purely by human force. It consists of a long shaft with handles at the top and two auger blades at the bottom. Manual post hole diggers are suitable for smaller digging tasks and require physical exertion from the operator.
- Two-Person Post Hole Digger: Also known as a dual-handle post hole digger, this type requires two people to operate. It features longer handles to provide better leverage and stability. By having one person stabilize the digger while the other applies downward force, two-person post hole diggers make it easier to dig deeper and wider holes compared to a single-person manual digger.
- Clamshell Post Hole Digger: This type of digger has a hinged jaw-like mechanism instead of auger blades. The two halves of the clamshell digger close together when forced into the ground, and when lifted, they bring the soil along with them. Clamshell post hole diggers are useful for digging in loose or sandy soil where augers may not be as effective.
- Power Auger: Power augers are mechanical post hole diggers that are either gas-powered or electric-powered. They feature an engine or motor that drives the rotating auger blades into the ground. Power augers are more efficient and require less physical effort compared to manual diggers. They are suitable for larger digging tasks or when working with compacted or rocky soil.
- Hydraulic Post Hole Digger: Hydraulic post hole diggers are heavy-duty machines commonly used in construction or industrial settings. They are typically attached to tractors or other heavy machinery and utilize hydraulic power to drive the auger blades into the ground. Hydraulic diggers are capable of digging large and deep holes quickly and efficiently.
When choosing a post hole digger, factors such as the size of the holes needed, the type of soil, and the available physical strength or equipment should be taken into consideration. Each type of post hole digger has its advantages and is suited for different applications, so selecting the right one will ensure efficient and successful digging.
editor by CX 2023-12-25
China Hot selling Hydraulic Earth Auger Drive Machine Drill Bit Post Hole Digger pto shaft adapter tractor supply
Product Description
RAY ATTACHMENTS Earth Auger is a kind of CHINAMFG hole machine. It can be mounted to all common hydraulic excavators as well as mini excavator and other carrier like skid steer loader, backhoe loader,telescopic handler, wheel loader and other machinery.Our auger drive can installed with earth drill, stump planner, mixer bowl for different uses.
Specification:
Model | Oil Folw | Max Torque | Pressure | Rotary Speed | Carrier | Oil Hose | Drill Dia. | |||
gal./min | I/min | Lbf·Ft | N·M | Psi | Bar | Rpm | T | Inch | mm | |
REA2000 | 6-14 | 23-53 | 2537 | 1871 | 3000 | 205 | 40-92 | 1-2.5 | 1/2 | 100-400 |
REA2500 | 8-16 | 30-61 | 3297 | 2432 | 3000 | 205 | 40-82 | 1.5-3 | 1/2 | 100-500 |
REA3000 | 8-16 | 30-61 | 3900 | 2877 | 3500 | 240 | 40-81 | 2-3.5 | 1/2 | 100-600 |
REA3500 | 8-18 | 30-68 | 4900 | 3614 | 3500 | 240 | 32-72 | 2.5-4.5 | 1/2 | 100-750 |
REA4500 | 10-20 | 38-76 | 5719 | 4218 | 3500 | 240 | 32-64 | 3-5 | 1/2 | 100-900 |
REA5000 | 10-20 | 38-76 | 6855 | 5056 | 3500 | 240 | 29-58 | 4.5-7 | 1/2 | 150-600 |
REA5500 | 12-22 | 45-83 | 8012 | 5910 | 3500 | 240 | 28-50 | 5-7 | 1/2 | 150-750 |
REA6000 | 12-28 | 45-106 | 8338 | 6150 | 3500 | 240 | 34-80 | 6-8 | 3/4 | 150-900 |
REA7000 | 16-32 | 61-121 | 9397 | 6931 | 3500 | 240 | 37-72 | 7-10 | 3/4 | 150-900 |
REA8000 | 16-36 | 61-136 | 1571 | 8048 | 3500 | 240 | 29-64 | 8-12 | 3/4 | 150-900 |
REA10000 | 18-36 | 70-136 | 14612 | 1571 | 3500 | 240 | 26-45 | 10-13 | 3/4 | 150-900 |
REA12000 | 21-37 | 80-140 | 16236 | 11976 | 3500 | 240 | 22-43 | 13-17 | 1 | 150-900 |
REA15000 | 21-40 | 80-151 | 20399 | 15046 | 3500 | 240 | 20-39 | 13-17 | 1 | 150-1200 |
REA20000 | 21-45 | 80-170 | 25812 | 19039 | 3500 | 240 | 17-34 | 13-20 | 1 | 150-1200 |
REA25000 | 24-48 | 90-180 | 33825 | 24949 | 3500 | 240 | 16-30 | 15-23 | 1 | 150-1200 |
REA50000 | 26-74 | 100-280 | 68052 | 50195 | 4000 | 280 | 11-30 | 21-50 | 1 | 300-2400 |
Aslo, these details just help you know our products quickly. Please feel free to contact with me ,that’s my duty and honor to help you find the appropriate product.
Q: Are you a manufacturer?
A: Yes,our factory was established in 2002 and we have our own trading company.
Q: Are you sure your product will fit my excavator?
A: Yes, we are professional about this, you can also tell me your excavator model, and we will check it for you.
Q: Can you provide customers’ design?
A: Sure, we can provide OEM and ODM service.
Q: What’s the MOQ and payment terms?
A: MOQ is 1set. Payment via T/T,L/C, Western Union accepted, other terms can be negotiated.
Q: How about delivery time?
A: 5-25 work days after the payment, depend on your quantity.
Q: How about the package?
A: Our earth auger packed by polywood case.
Q: Which country have you exported?
A: Vietnam, Saudi Arabia, America, Thailand, New Zealand, Canada, Australia, Peru, Chile, Brazil, Mexico, Iran, South Africa, etc.
After-sales Service: | Video Technical Support, Online Support |
---|---|
Warranty: | 18 Months for Excavator |
Certification: | CE, ISO 9001:2008 |
Condition: | New |
Drill Hole Diameter: | 100mm – 1200mm |
Drill Hole Depth: | 1m – 30m |
Customization: |
Available
| Customized Request |
---|
What maintenance practices are essential for prolonging the lifespan of a post hole digger?
Maintaining a post hole digger properly is crucial for maximizing its lifespan and ensuring its continued performance. Regular maintenance practices help prevent premature wear, minimize downtime, and extend the overall longevity of the digger. Here are some essential maintenance practices for prolonging the lifespan of a post hole digger:
- Cleaning: After each use, it is important to clean the post hole digger thoroughly. Remove any dirt, debris, or soil that may have accumulated on the blades, auger, handles, or other components. Use a brush or hose to remove stubborn dirt. Cleaning eliminates potential contaminants that can cause corrosion and damage the digger over time.
- Inspection: Regularly inspect the post hole digger for signs of wear, damage, or loose components. Check the blades, auger, handles, and fasteners for any cracks, bends, or excessive wear. Ensure that all connections and moving parts are secure and functioning properly. Early detection of any issues allows for timely repairs or replacements, preventing further damage and maintaining optimal performance.
- Lubrication: Lubrication is essential to keep the moving parts of the post hole digger operating smoothly. Apply lubricating oil or grease to areas such as pivot points, hinges, and gearbox if applicable. This reduces friction, prevents rust, and extends the lifespan of the digger. Follow the manufacturer’s recommendations regarding the type and frequency of lubrication.
- Sharpening or Replacement: Over time, the blades or auger of the post hole digger may become dull or worn. Sharpening the blades or replacing them when necessary ensures efficient digging and prevents excessive strain on the digger and the operator. Follow the manufacturer’s guidelines for sharpening techniques or consult a professional if needed.
- Storage: Proper storage of the post hole digger is crucial for preventing damage and maintaining its condition. Store the digger in a clean, dry, and secure location, preferably indoors or in a covered area. Protect the blades and auger from moisture, which can cause rust. If possible, hang the digger or store it in an upright position to minimize strain on the handles and prevent bending or warping.
- Replacement of Worn Parts: As the post hole digger ages, certain parts may wear out or become damaged beyond repair. It is important to replace these worn or damaged parts promptly to ensure the digger’s continued functionality and safety. Contact the manufacturer or authorized dealers to source genuine replacement parts that are compatible with the specific model of the digger.
- Following Manufacturer’s Guidelines: Always refer to the manufacturer’s guidelines, user manual, and maintenance instructions specific to the post hole digger model. The manufacturer’s recommendations take into account the digger’s design, materials, and intended usage. Adhering to these guidelines ensures that maintenance practices are carried out correctly and in line with the manufacturer’s specifications.
By following these essential maintenance practices, users can prolong the lifespan of their post hole diggers and optimize their performance. Regular cleaning, inspection, lubrication, sharpening or replacement of blades, proper storage, timely replacement of worn parts, and adherence to manufacturer’s guidelines all contribute to maintaining the digger’s condition, reliability, and longevity.
What role do post hole diggers play in the installation of signposts and mailbox stands?
Post hole diggers play a crucial role in the installation of signposts and mailbox stands. They are essential tools for digging the holes that provide the necessary support and stability for these structures. Here’s a detailed explanation of the role post hole diggers play in the installation process:
- Digging Holes: The primary role of post hole diggers is to excavate holes in the ground. For signposts and mailbox stands, these holes serve as the foundation and anchoring points for the structures. Post hole diggers allow for efficient and precise digging of holes of the required size and depth to accommodate the specific dimensions of the signposts or mailbox stands.
- Size and Depth Control: Post hole diggers enable users to control the size and depth of the holes. Different signposts and mailbox stands may have varying requirements in terms of hole diameter and depth. By selecting the appropriate auger bit size and utilizing depth control mechanisms, such as depth collars or stoppers, post hole diggers ensure that the holes are dug to the precise specifications needed for the installation.
- Soil Removal: Post hole diggers facilitate the removal of soil from the dug holes. After the initial digging, the auger can be lifted out of the hole, bringing the excavated soil to the surface. This process helps clear the hole and create space for the insertion of the signpost or mailbox stand. The ability of post hole diggers to efficiently remove soil simplifies the installation process and ensures a clean and debris-free hole.
- Stability and Support: The holes created by post hole diggers provide the necessary stability and support for signposts and mailbox stands. Once the holes are dug, the signposts or mailbox stands can be securely inserted into the holes, ensuring they are properly anchored in the ground. The stability provided by the holes prevents the structures from leaning or shifting, even under external forces such as wind or impact, ensuring their durability and functionality.
- Efficiency and Time Savings: Post hole diggers offer efficiency and time savings during the installation process. Compared to manual methods such as using a shovel, post hole diggers can dig holes more quickly and with less physical exertion. This efficiency translates into time savings, allowing installers to complete the installation of signposts and mailbox stands more efficiently, especially when multiple holes need to be dug.
- Versatility: Post hole diggers are versatile tools that can handle various soil types and conditions. Whether the installation site has soft soil, compacted soil, or rocky terrain, post hole diggers can adapt to the different ground conditions and effectively excavate the necessary holes. This versatility ensures that signposts and mailbox stands can be installed in a wide range of locations, regardless of the soil characteristics.
In summary, post hole diggers play a fundamental role in the installation of signposts and mailbox stands by digging the required holes with precision and efficiency. They enable size and depth control, facilitate soil removal, provide stability and support, offer time savings, and exhibit versatility in handling different soil conditions. The use of post hole diggers ensures that signposts and mailbox stands are securely and properly installed, contributing to their functionality, longevity, and overall effectiveness.
Can you explain the different types of post hole diggers available?
There are several types of post hole diggers available, each designed for specific purposes and varying levels of manual effort. Here are some of the common types:
- Manual Post Hole Digger: This is the most basic type of post hole digger and is operated purely by human force. It consists of a long shaft with handles at the top and two auger blades at the bottom. Manual post hole diggers are suitable for smaller digging tasks and require physical exertion from the operator.
- Two-Person Post Hole Digger: Also known as a dual-handle post hole digger, this type requires two people to operate. It features longer handles to provide better leverage and stability. By having one person stabilize the digger while the other applies downward force, two-person post hole diggers make it easier to dig deeper and wider holes compared to a single-person manual digger.
- Clamshell Post Hole Digger: This type of digger has a hinged jaw-like mechanism instead of auger blades. The two halves of the clamshell digger close together when forced into the ground, and when lifted, they bring the soil along with them. Clamshell post hole diggers are useful for digging in loose or sandy soil where augers may not be as effective.
- Power Auger: Power augers are mechanical post hole diggers that are either gas-powered or electric-powered. They feature an engine or motor that drives the rotating auger blades into the ground. Power augers are more efficient and require less physical effort compared to manual diggers. They are suitable for larger digging tasks or when working with compacted or rocky soil.
- Hydraulic Post Hole Digger: Hydraulic post hole diggers are heavy-duty machines commonly used in construction or industrial settings. They are typically attached to tractors or other heavy machinery and utilize hydraulic power to drive the auger blades into the ground. Hydraulic diggers are capable of digging large and deep holes quickly and efficiently.
When choosing a post hole digger, factors such as the size of the holes needed, the type of soil, and the available physical strength or equipment should be taken into consideration. Each type of post hole digger has its advantages and is suited for different applications, so selecting the right one will ensure efficient and successful digging.
editor by CX 2023-11-17