Product Description
1.Products Description
CTHB earth auger application in Landscaping, Tree planting, Well boring, Foundation piles, Screw pile installations, Ground source heat pumps, Pole and Mast Installations, Solar energy piling, Bridge pier drilling etc.
2.Detail Image
3.Appllication
4.Technical Parameter
| Model No. | 2000 | 3000 | 4500 | 6000 | 8000 | 10000 | 15000 | 20000 | 25000 |
| Excavator Weight | 1.5-3T | 2-4T | 3-5T | 4-6T | 6-8T | 6-10T | 10-15T | 15-20T | 15-25T |
| Max Torque | 2000Nm | 3000Nm | 4500Nm | 6000Nm | 8000Nm | 9000Nm | 15000Nm | 20000Nm | 25000Nm |
| Pressure Range | 60-240Bar | 70-240Bar | 70-240Bar | 80-240Bar | 80-240Bar | 80-240Bar | 80-240Bar | 80-240Bar | 80-310Bar |
| Flow Range | 20-70Lpm | 25-70Lpm | 20-80Lpm | 50-85Lpm | 50-85Lpm | 50-95Lpm | 60-150Lpm | 75-200Lpm | 60-250Lpm |
| Output Shaft | 65mm¡ | 65mm¡ | 65mm¡ | 75¨ | 75¨ | 75¨ | 75¨ | 75¨ | 75¨ |
| Diameter of Unit Drive | 190mm | 232mm | 238mm | 245mm | 272mm | 280mm | 338mm | 345mm | 355mm |
| Max Rotate Speed | 65r/min | 60r/min | 56r/min | 50r/min | 48r/min | 45r/min | 38r/min | 35r/min | 28r/min |
| Weight of Unit Drive | 28kg | 74kg | 95kg | 134kg | 160kg | 168kg | 240kg | 272kg | 320kg |
5.Diameter and the Depth of hole to be drilled
Extension Rod
Extension rods are used to extend the drill pipe.
Diameter: 89mm, 108mm,127mm, 146mm.
Length: 1m, 1.5m, 2m, 3m
OR: customization
Auger Drill
The drill pipe is the part of contact with the ground for drilling and fetching.
diameter:100mm-2000mm
maximum deepth:10 m
6.Pin Hitch
7.Teeth & Pilot
Rock auger drill: It fit to rock, pitch or a lot of CHINAMFG land.
Tungsten auger drill: It fit to clay, snady land or a little gravel. CHINAMFG the soil land very easily.
Sharp auger drill: It fit to rock, concrete, cement, asphalt and so on.
8.Company Profile
HangZhou chengtai construction machinery Co., Ltd. is located in the beautiful coastal city of HangZhou,ZheJiang . It is a modern enterprise specializing in R & D, production and sales of front-end hydraulic attachments for excavators. The company has been committed to the development, production and sales of excavator front-end devices for many years. The company mainly produces:various front-end such as hydraulic breaker,compactor,quick connector,ripper, etc. Attachment device can be adapted to domestic and foreign large, medium and small any brand excavators, and can be customized according to the customer’s operating environment requirements Special attachments for working conditions. Our company has advanced production equipment, perfect product testing methods and quality assurance system. The company has a professional technical team, from the development of new products to the production process in the process, and then to the after-sales service of the product, to provide firm technical support for high-quality products.
9.Our certification
10.Hot Sale
11.Packing &delivery
Mode of transport:Deliver by sea/Air/multimodel transport/logistic or Express company is available
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Lifetime After-Sales |
|---|---|
| Warranty: | 12 Months |
| Type: | Hydraulic |
| Application: | Excavator |
| Certification: | CE, ISO9001: 2000 |
| Condition: | New |
| Samples: |
US$ 2000/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do post hole diggers contribute to the efficiency of tasks like deck construction?
Post hole diggers play a vital role in improving the efficiency of tasks like deck construction. They offer several benefits that enhance the overall construction process and expedite the installation of decks. Here are some ways post hole diggers contribute to the efficiency of tasks like deck construction:
- Precise Hole Digging: Post hole diggers allow for precise and consistent hole digging. They are designed to excavate holes of the desired diameter and depth, ensuring accuracy and uniformity in the placement of deck support posts. This precision is crucial for maintaining the structural integrity and alignment of the deck, especially when multiple posts need to be installed.
- Time and Labor Savings: Compared to manual digging methods, post hole diggers significantly reduce the time and physical effort required to excavate holes for deck posts. The mechanical action of the digger, whether it’s a manual or powered model, allows for quicker and more efficient digging, minimizing the need for strenuous manual labor. This time and labor savings translate to increased productivity and faster completion of the deck construction project.
- Consistent Hole Depth: Achieving consistent hole depths is crucial for achieving a level and stable deck structure. Post hole diggers help maintain consistent hole depths by providing depth control features or markings on the digger. This ensures that all the deck support posts are set at the same height, resulting in an even and uniform deck surface.
- Reduced Soil Disruption: Post hole diggers are designed to minimize soil disruption during the digging process. They remove soil from the hole without disturbing the surrounding area excessively. This is particularly important in deck construction, where the integrity of the adjacent ground needs to be preserved to support the overall stability of the deck and prevent soil erosion.
- Ease of Operation: Post hole diggers are designed to be user-friendly and easy to operate. They typically feature ergonomic handles, balanced weight distribution, and intuitive controls. This ease of operation reduces operator fatigue and allows for more efficient and comfortable digging, especially when multiple holes need to be excavated for a deck construction project.
- Versatility: Post hole diggers offer versatility in terms of the types of soil they can handle. They are designed to tackle different soil conditions, including clay, loam, gravel, or sandy soils. This versatility ensures that the digger can efficiently excavate holes in various locations, enabling deck construction in diverse geographical areas.
- Adaptability to Various Deck Designs: Post hole diggers can accommodate different deck designs and configurations. Whether it’s a small backyard deck or a larger multi-level deck, post hole diggers can be used to excavate holes for support posts at the appropriate locations and spacing dictated by the deck design plans. This adaptability streamlines the construction process and facilitates the realization of various deck designs.
By offering precise hole digging, time and labor savings, consistent hole depth, reduced soil disruption, ease of operation, versatility, and adaptability to various deck designs, post hole diggers significantly contribute to the efficiency of tasks like deck construction. They streamline the process, improve productivity, and help ensure the construction of a sturdy, level, and well-aligned deck structure.
Can post hole diggers be adapted for use in both residential and commercial projects?
Yes, post hole diggers are versatile tools that can be adapted for use in both residential and commercial projects. Their design, features, and capabilities make them suitable for a wide range of applications, regardless of the scale or nature of the project. Here are some reasons why post hole diggers can be effectively used in both residential and commercial projects:
- Size Options: Post hole diggers are available in various sizes to accommodate different project requirements. They come in compact, lightweight versions ideal for residential use, as well as larger, heavy-duty models suitable for commercial projects. The availability of different size options ensures that post hole diggers can be matched to the specific needs of the project, whether it’s a small backyard fence installation or a large-scale commercial construction project.
- Adjustable Depth and Diameter: Many post hole diggers feature adjustable depth and diameter capabilities. This adaptability allows users to customize the digging parameters based on the specific project requirements. Whether it’s digging shallow holes for residential fence posts or deeper holes for commercial applications such as signposts or structural supports, post hole diggers can be adjusted to meet the desired depth and diameter specifications.
- Soil Compatibility: Post hole diggers are designed to handle various soil types commonly encountered in both residential and commercial projects. They can effectively dig holes in soil compositions such as clay, loam, gravel, or sandy soils. This versatility ensures that post hole diggers can be used in different geographical locations, whether it’s a residential backyard or a commercial construction site.
- Portability: Post hole diggers are generally designed to be portable and easy to transport. They can be maneuvered and operated in different project locations, whether it’s a residential property or a commercial worksite. The portability of post hole diggers allows for flexibility and convenience in tackling various projects, making them suitable for both residential and commercial applications.
- Efficiency and Time Savings: In both residential and commercial projects, efficiency and time savings are essential. Post hole diggers offer significant advantages in this regard. Their mechanical action, whether manual or powered, allows for faster and more efficient digging compared to manual methods. This translates to time savings and increased productivity, benefiting both residential homeowners and commercial contractors.
- Multiple Applications: Post hole diggers have multiple applications beyond residential or commercial projects. They can be utilized in various industries such as agriculture, landscaping, and construction. Their versatility makes them valuable tools for tasks like planting trees, installing poles, erecting signs, or setting up outdoor structures. This wide range of applications further highlights the adaptability of post hole diggers across different project types and sectors.
Overall, post hole diggers can be effectively adapted for use in both residential and commercial projects. Their size options, adjustable depth and diameter capabilities, soil compatibility, portability, efficiency, time savings, and multiple applications make them versatile tools that can tackle a wide range of projects, regardless of the residential or commercial context.
How do post hole diggers handle variations in soil types and conditions?
Post hole diggers are designed to handle variations in soil types and conditions, allowing for effective hole digging across different terrains. Here’s how they address these variations:
- Blade Design: Post hole diggers typically feature blades or augers with different designs to accommodate various soil types. For example, some blades have pointed tips and aggressive cutting edges, which are suitable for penetrating hard or compacted soils. Other blades may have a more open design with wider spacing, allowing for easier soil removal in softer or looser soils.
- Auger Size: Post hole diggers come in different auger sizes, allowing for versatility in handling different soil conditions. Larger augers are suitable for digging in softer soils where more soil needs to be displaced, while smaller augers are better for compacted or rocky soils where more effort is required to penetrate the ground.
- Power Source: Motorized post hole diggers, such as gas-powered or electric-powered ones, provide additional power to handle variations in soil types and conditions. The increased torque and rotational force generated by the power source enable the auger blades to overcome resistance in challenging soils, including compacted soil, clay, or rocky terrain.
- Adjustable Depth: Some post hole diggers offer adjustable depth settings, allowing operators to dig holes of varying depths. This feature is particularly useful when encountering different soil layers or when specific hole depths are required for a particular application. Operators can easily adapt the depth setting to match the soil conditions they are working with.
- Operator Technique: The operator’s technique plays a significant role in handling variations in soil types and conditions. Experienced operators know how to adjust the pressure, angle, and rotational speed of the post hole digger based on the specific soil they are working with. They may modify their approach to account for variations in soil hardness, moisture content, or presence of rocks or roots.
- Additional Tools and Accessories: In some cases, additional tools and accessories can be used in conjunction with post hole diggers to address specific soil challenges. For example, soil auger extensions can be added to reach greater depths in deep or sandy soils. Soil loosening agents or water can be employed to soften or moisten the soil, making it easier to dig.
By incorporating these design features, adjusting settings, employing proper technique, and utilizing additional tools if necessary, post hole diggers can effectively handle variations in soil types and conditions. However, it’s important to note that extremely hard or rocky soils may still pose challenges even for post hole diggers. In such cases, alternative methods or specialized equipment may be required to complete the digging task successfully.
editor by CX 2024-05-08
China factory Full Hydraulic 0.91cbm Bucket 21t Wheel Excavator pto shaft adapter tractor supply
Product Description
Full Hydraulic 0.91cbm Bucket 21t Wheel Excavator
Our company will offer you the high quality products with a low price, quick delivery,and professional after-sale service.
HangZhou CHINAMFG Machinery CO., LTD
HangZhou CHINAMFG Machinery CO., LTD
Full Hydraulic 0.91cbm Bucket 21t Wheel Excavator
| Specifications | Unit | XE215C |
| Operation Weight | kg | 21900 |
| Buket Capacity | m³ | 0.9~1.0 |
| Engiee Model | CC-6BG1TRP | |
| Output power | kw/rpm | 128.5/2100 |
| Tonque/speed | N.m/rpm | 637/1800 |
| Displacement | L | 6.494 |
| Travel speed(H/L) | km/h | 5.5/3.3 |
| Ground pressure | kPa | 47.2 |
| Bucket CHINAMFG force | kN | 149 |
| Arm CHINAMFG force | kN | 111 |
| Max. traction | kN | 184 |
| Fuel tank capacity | L | 400 |
| Engine oil capacity | L | 25 |
| Hydraulic tank capacity | L | 220 |
| Overall length | mm | 9625 |
| Overall width | mm | 2990 |
| Overall height | mm | 3100 |
| Crawler gauge | mm | 2390 |
| Max. CHINAMFG height | mm | 9620 |
| Max. dumping height | mm | 6780 |
| Max. CHINAMFG depth | mm | 6680 |
Full Hydraulic 0.91cbm Bucket 21t Wheel Excavator
XE215C is suitable for earth and stone construction projects such as municipal construction, highway bridges, housing construction, road engineering, farmland water conservancy construction, port construction and so on, it has features of good flexibility and maneuverabiliity, low fuel consumption, high construction efficiency, large CHINAMFG force, comfortable driving environment and wide range of application.
1,The overall layout and the axle load distribution are more reasonable to achieve better traveling stability and the maximum traveling speed is up to 40km/h to realize faster site transfer speed.
2,The domestic leading hydraulic system distribution technology features high energy-saving and efficiency.
3,The highest breakout force on the loading end is leading the industry by 15%~20% compared with like models.
4,The advanced structure and hinge points on the CHINAMFG end and the industry’s largest rotating angle of the bucket ensure strong soil holding capacity.
HangZhou CHINAMFG Machinery CO., LTD
MULTIPLE SHIPPING WAYS TO SAVE SHIPPING FREIGHT FOR YOU
WHY CHOOSE US?
Experience
10 years experience of production,sales,research and development in the field of special trucks.
Specialization
We can produce according to your demand, the material,the size, the color and the logo is optional for you.
Good quality
Has CHINAMFG technology, advanced equipments ;Reliant quality and flexible modes of operation also have strict quality control system and passed the iso9001-2008 and the 3c (china compulsory certification),with SGS,BV certifcate as well.
Chassis supply
We have a very good long term cooperation relationship with chassis manufacturer, Such as SINOTRUK, BEIBEN, FAW, FOTON, SHACMAN, SHXIHU (WEST LAKE) DIS.I, CIMC, XIHU (WEST LAKE) DIS.FENG and so on.
HangZhou CHINAMFG Machinery CO., LTD
OUR SERVICE
(1) More than 300 workers ,large and advanced production;
(2) Have professional engineer,can offer the best solutions;
(3) With keeping good relation with SINOTRUK, FOTON, DFAC, FOTON, CHINAMFG chassis factory.
(4) Build strict QC team to guarantee the quality;
(5) Own good sales team, can offer warm follow-up service.
(6) Spare Parts Supply:
We have our own spear parts departments,have strong production and distribution capability. We can satisfy your demand within 2-7 days. We always do our best to solve the problems, and put our customers’ interests in the first place. And We can Supply Spare Parts For Many Brands, Such as SINOTRUK, BEIBEN, FAW, FOTON, SHACMAN, SHXIHU (WEST LAKE) DIS.I, CIMC, XIHU (WEST LAKE) DIS.FENG and so on.
HangZhou CHINAMFG Machinery CO., LTD
FAQ
1, How to purchase the trailer truck from your company?
You can choose the model from our website, also you can tell our sales manger your specific requirements and we will recommend the suitable model to you. After confirming the model and price, we can CHINAMFG the contract.
2,How to ensure product quality?
Firstly,we passed the international quality system certification. Secondly, Made in China Group has conducted field certification for our factory. Finally,You can entrust third party individuals or organizations to inspect our products before delivery.
3, How to visit your factory?
After you arriving at China, you can fly to HangZhou airport. HangZhou airport is located in HangZhou City, ZheJiang Province. Our driver will meet you at HangZhou airport and take you to our factory by car.
WELCOME TO CONTACT US
If you are interested in any of construction machinery for sale,please feel free to contact me. Also, welcome to China and visit our construction machinery factory for construction machinery price or to discuss more details.
HangZhou CHINAMFG Machinery CO., LTD
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | Crawler Excavator |
|---|---|
| Usage: | Mining Excavator, GM Excavator |
| Bucket: | Shovel |
| Transmission: | Hydraulic Transmission |
| Drive Type: | Internal Combustion Drive |
| Bucket Capacity: | 0.5~1.0m³ |
| Customization: |
Available
| Customized Request |
|---|
What maintenance practices are essential for prolonging the lifespan of a post hole digger?
Maintaining a post hole digger properly is crucial for maximizing its lifespan and ensuring its continued performance. Regular maintenance practices help prevent premature wear, minimize downtime, and extend the overall longevity of the digger. Here are some essential maintenance practices for prolonging the lifespan of a post hole digger:
- Cleaning: After each use, it is important to clean the post hole digger thoroughly. Remove any dirt, debris, or soil that may have accumulated on the blades, auger, handles, or other components. Use a brush or hose to remove stubborn dirt. Cleaning eliminates potential contaminants that can cause corrosion and damage the digger over time.
- Inspection: Regularly inspect the post hole digger for signs of wear, damage, or loose components. Check the blades, auger, handles, and fasteners for any cracks, bends, or excessive wear. Ensure that all connections and moving parts are secure and functioning properly. Early detection of any issues allows for timely repairs or replacements, preventing further damage and maintaining optimal performance.
- Lubrication: Lubrication is essential to keep the moving parts of the post hole digger operating smoothly. Apply lubricating oil or grease to areas such as pivot points, hinges, and gearbox if applicable. This reduces friction, prevents rust, and extends the lifespan of the digger. Follow the manufacturer’s recommendations regarding the type and frequency of lubrication.
- Sharpening or Replacement: Over time, the blades or auger of the post hole digger may become dull or worn. Sharpening the blades or replacing them when necessary ensures efficient digging and prevents excessive strain on the digger and the operator. Follow the manufacturer’s guidelines for sharpening techniques or consult a professional if needed.
- Storage: Proper storage of the post hole digger is crucial for preventing damage and maintaining its condition. Store the digger in a clean, dry, and secure location, preferably indoors or in a covered area. Protect the blades and auger from moisture, which can cause rust. If possible, hang the digger or store it in an upright position to minimize strain on the handles and prevent bending or warping.
- Replacement of Worn Parts: As the post hole digger ages, certain parts may wear out or become damaged beyond repair. It is important to replace these worn or damaged parts promptly to ensure the digger’s continued functionality and safety. Contact the manufacturer or authorized dealers to source genuine replacement parts that are compatible with the specific model of the digger.
- Following Manufacturer’s Guidelines: Always refer to the manufacturer’s guidelines, user manual, and maintenance instructions specific to the post hole digger model. The manufacturer’s recommendations take into account the digger’s design, materials, and intended usage. Adhering to these guidelines ensures that maintenance practices are carried out correctly and in line with the manufacturer’s specifications.
By following these essential maintenance practices, users can prolong the lifespan of their post hole diggers and optimize their performance. Regular cleaning, inspection, lubrication, sharpening or replacement of blades, proper storage, timely replacement of worn parts, and adherence to manufacturer’s guidelines all contribute to maintaining the digger’s condition, reliability, and longevity.
How do post hole diggers ensure controlled and precise digging in tight spaces?
Post hole diggers are equipped with various features and techniques to ensure controlled and precise digging in tight spaces. These elements allow users to navigate limited areas and maintain accuracy during the digging process. Here’s how post hole diggers achieve controlled and precise digging in tight spaces:
- Compact Design: Post hole diggers are designed to be compact and maneuverable. They typically have a narrow frame and a slim profile, allowing them to fit into tight spaces where larger machinery or tools may not have access. The compact design enables operators to position the digger accurately and maintain control while digging in confined areas.
- Shorter Shaft Length: Some post hole diggers feature shorter shaft lengths compared to standard models. The shorter shaft allows for better control and maneuverability in tight spaces. By reducing the overall length of the digger, operators can more easily navigate around obstacles and maintain precise digging movements without compromising stability.
- Adjustable Handle Positions: Many post hole diggers have adjustable handle positions. The handles can be repositioned or rotated to suit the operator’s preference and the specific requirements of the tight space. By adjusting the handle position, operators can maintain a comfortable grip and optimize control while working in confined areas.
- Operator Technique: The technique employed by the operator is crucial in achieving controlled and precise digging in tight spaces. Skilled operators can utilize specific techniques such as careful hand placement, controlled force application, and precise movements to navigate around obstacles and maintain accuracy. With practice and experience, operators can adapt their technique to the limitations of tight spaces, ensuring controlled and precise digging.
- Graduated Markings or Measurements: Some post hole diggers feature graduated markings or measurements on the shaft or handle. These markings serve as visual references for the operator, allowing them to monitor the depth and progress of the hole while working in tight spaces. By referring to the measurements, operators can ensure consistent and precise digging depths, even in limited areas.
- Manual Control: Manual post hole diggers offer a high level of manual control, which can be advantageous in tight spaces. By physically operating the digger and exerting force directly, operators have fine control over the speed, direction, and depth of the digging process. The ability to make subtle adjustments on the spot enables controlled and precise digging, particularly in areas where precision is critical.
Through their compact design, shorter shaft lengths, adjustable handle positions, emphasis on operator technique, graduated markings or measurements, and manual control, post hole diggers ensure controlled and precise digging in tight spaces. These features and techniques allow operators to navigate around obstacles, maintain accuracy, and achieve the desired hole dimensions even when working in confined areas.
What are the key components of a manual post hole digger?
A manual post hole digger consists of several key components that work together to facilitate the digging process. Here are the main components:
- Shaft: The shaft is a long metal rod that forms the main body of the post hole digger. It provides the structural support and stability while digging. The shaft is typically made of steel or another durable material to withstand the forces exerted during digging.
- Handles: At the top of the shaft, there are two handles positioned opposite each other. The handles are designed for the operator to grip and apply downward force while digging. They provide leverage and control, allowing the operator to maneuver the post hole digger effectively.
- Auger Blades: The auger blades are the cutting or digging elements of the post hole digger. They are attached to the bottom end of the shaft and are responsible for penetrating the ground and removing soil. Auger blades are typically made of hardened steel to withstand the abrasive nature of soil and provide durability.
- Blade Spacing: The spacing between the two auger blades is an important aspect of a manual post hole digger. It determines the width of the hole being dug. The blade spacing can vary depending on the specific model or intended use of the digger.
- Twist or Spiral Design: The auger blades are shaped in a twist or spiral pattern. This design allows them to efficiently move through the soil as they rotate. The twisting motion helps break up the soil and facilitates the removal process.
- Blade Point: The bottom end of each auger blade usually comes to a sharp point. This point helps initiate the penetration into the ground, allowing the blades to start digging and create a hole.
When using a manual post hole digger, the operator grips the handles, positions the auger blades at the desired location, and applies downward force while simultaneously twisting the digger. This action drives the blades into the ground, loosening the soil. The operator then lifts the digger out of the hole, bringing the loosened soil to the surface.
By understanding the key components and their functions, operators can effectively utilize a manual post hole digger to dig holes for various purposes.
editor by CX 2024-02-10
China manufacturer CHINAMFG Sy210c 20 Ton Wholesale Mining Excavators Chinese Supplier pto shaft adapter tractor supply
Product Description
SY210C 21 ton excavator features strengthened structure, undercarriage and components, making it very robust and reliable. Low maintenance cost and high fuel efficiency of the SY210C medium excavator help customers make more profit.
Advanced Dynamic Control
High Profitability
Remote Monitoring System
Stable and Reliable
| Engine model | Cummins BT5.9-140C |
| Rated power | 104/2000 kW/rpm |
| Emission standard | Tier2 |
| Operating weight | 20900kg |
| Std. track shoe width | 600mm |
| Bucket capacity | 0.93m³ |
| Boom length | 5700 mm |
| Arm length | 2400 mm |
Construction Cases of CHINAMFG Excavator
Develiery Site of CHINAMFG Excavator
Produce Environment of SANY
Certification of CHINAMFG Excavator
SANY On Exhibition
SANY Company Introduce
SANY has built 25 manufacturing bases, 6 sales regions, and over 100 offices with more than 400 agents and 8,000 suppliers worldwide. In China, CHINAMFG has established 6 industry parks in ZheJiang , HangZhou, ZheJiang , HangZhou, HangZhou and Urumchi. With global R&D centers and manufacturing bases in the US, Germany, India and Brazil, SANY’s products are exported to 150 countries and regions.
FAQ
1: What kind terms of payment can be accepted?
A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted
2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, Gost, EPA(USA)CCC,
3: What about the delivery time?
A: 7-20 days after receiving the deposit.
4: What about the warranty time?
A: 12 months after shipment or 2000 working hours, whichever occuts first.
5. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | Crawler Excavator |
|---|---|
| Usage: | Special Excavator, Marine Excavator, Mining Excavator |
| Bucket: | Backhoe |
| Transmission: | Hydraulic Transmission |
| Drive Type: | Internal Combustion Drive |
| Bucket Capacity: | 0.5~1.0m³ |
| Customization: |
Available
| Customized Request |
|---|
How do post hole diggers contribute to the efficiency of tasks like deck construction?
Post hole diggers play a vital role in improving the efficiency of tasks like deck construction. They offer several benefits that enhance the overall construction process and expedite the installation of decks. Here are some ways post hole diggers contribute to the efficiency of tasks like deck construction:
- Precise Hole Digging: Post hole diggers allow for precise and consistent hole digging. They are designed to excavate holes of the desired diameter and depth, ensuring accuracy and uniformity in the placement of deck support posts. This precision is crucial for maintaining the structural integrity and alignment of the deck, especially when multiple posts need to be installed.
- Time and Labor Savings: Compared to manual digging methods, post hole diggers significantly reduce the time and physical effort required to excavate holes for deck posts. The mechanical action of the digger, whether it’s a manual or powered model, allows for quicker and more efficient digging, minimizing the need for strenuous manual labor. This time and labor savings translate to increased productivity and faster completion of the deck construction project.
- Consistent Hole Depth: Achieving consistent hole depths is crucial for achieving a level and stable deck structure. Post hole diggers help maintain consistent hole depths by providing depth control features or markings on the digger. This ensures that all the deck support posts are set at the same height, resulting in an even and uniform deck surface.
- Reduced Soil Disruption: Post hole diggers are designed to minimize soil disruption during the digging process. They remove soil from the hole without disturbing the surrounding area excessively. This is particularly important in deck construction, where the integrity of the adjacent ground needs to be preserved to support the overall stability of the deck and prevent soil erosion.
- Ease of Operation: Post hole diggers are designed to be user-friendly and easy to operate. They typically feature ergonomic handles, balanced weight distribution, and intuitive controls. This ease of operation reduces operator fatigue and allows for more efficient and comfortable digging, especially when multiple holes need to be excavated for a deck construction project.
- Versatility: Post hole diggers offer versatility in terms of the types of soil they can handle. They are designed to tackle different soil conditions, including clay, loam, gravel, or sandy soils. This versatility ensures that the digger can efficiently excavate holes in various locations, enabling deck construction in diverse geographical areas.
- Adaptability to Various Deck Designs: Post hole diggers can accommodate different deck designs and configurations. Whether it’s a small backyard deck or a larger multi-level deck, post hole diggers can be used to excavate holes for support posts at the appropriate locations and spacing dictated by the deck design plans. This adaptability streamlines the construction process and facilitates the realization of various deck designs.
By offering precise hole digging, time and labor savings, consistent hole depth, reduced soil disruption, ease of operation, versatility, and adaptability to various deck designs, post hole diggers significantly contribute to the efficiency of tasks like deck construction. They streamline the process, improve productivity, and help ensure the construction of a sturdy, level, and well-aligned deck structure.
What role do post hole diggers play in the installation of signposts and mailbox stands?
Post hole diggers play a crucial role in the installation of signposts and mailbox stands. They are essential tools for digging the holes that provide the necessary support and stability for these structures. Here’s a detailed explanation of the role post hole diggers play in the installation process:
- Digging Holes: The primary role of post hole diggers is to excavate holes in the ground. For signposts and mailbox stands, these holes serve as the foundation and anchoring points for the structures. Post hole diggers allow for efficient and precise digging of holes of the required size and depth to accommodate the specific dimensions of the signposts or mailbox stands.
- Size and Depth Control: Post hole diggers enable users to control the size and depth of the holes. Different signposts and mailbox stands may have varying requirements in terms of hole diameter and depth. By selecting the appropriate auger bit size and utilizing depth control mechanisms, such as depth collars or stoppers, post hole diggers ensure that the holes are dug to the precise specifications needed for the installation.
- Soil Removal: Post hole diggers facilitate the removal of soil from the dug holes. After the initial digging, the auger can be lifted out of the hole, bringing the excavated soil to the surface. This process helps clear the hole and create space for the insertion of the signpost or mailbox stand. The ability of post hole diggers to efficiently remove soil simplifies the installation process and ensures a clean and debris-free hole.
- Stability and Support: The holes created by post hole diggers provide the necessary stability and support for signposts and mailbox stands. Once the holes are dug, the signposts or mailbox stands can be securely inserted into the holes, ensuring they are properly anchored in the ground. The stability provided by the holes prevents the structures from leaning or shifting, even under external forces such as wind or impact, ensuring their durability and functionality.
- Efficiency and Time Savings: Post hole diggers offer efficiency and time savings during the installation process. Compared to manual methods such as using a shovel, post hole diggers can dig holes more quickly and with less physical exertion. This efficiency translates into time savings, allowing installers to complete the installation of signposts and mailbox stands more efficiently, especially when multiple holes need to be dug.
- Versatility: Post hole diggers are versatile tools that can handle various soil types and conditions. Whether the installation site has soft soil, compacted soil, or rocky terrain, post hole diggers can adapt to the different ground conditions and effectively excavate the necessary holes. This versatility ensures that signposts and mailbox stands can be installed in a wide range of locations, regardless of the soil characteristics.
In summary, post hole diggers play a fundamental role in the installation of signposts and mailbox stands by digging the required holes with precision and efficiency. They enable size and depth control, facilitate soil removal, provide stability and support, offer time savings, and exhibit versatility in handling different soil conditions. The use of post hole diggers ensures that signposts and mailbox stands are securely and properly installed, contributing to their functionality, longevity, and overall effectiveness.
What are the key components of a manual post hole digger?
A manual post hole digger consists of several key components that work together to facilitate the digging process. Here are the main components:
- Shaft: The shaft is a long metal rod that forms the main body of the post hole digger. It provides the structural support and stability while digging. The shaft is typically made of steel or another durable material to withstand the forces exerted during digging.
- Handles: At the top of the shaft, there are two handles positioned opposite each other. The handles are designed for the operator to grip and apply downward force while digging. They provide leverage and control, allowing the operator to maneuver the post hole digger effectively.
- Auger Blades: The auger blades are the cutting or digging elements of the post hole digger. They are attached to the bottom end of the shaft and are responsible for penetrating the ground and removing soil. Auger blades are typically made of hardened steel to withstand the abrasive nature of soil and provide durability.
- Blade Spacing: The spacing between the two auger blades is an important aspect of a manual post hole digger. It determines the width of the hole being dug. The blade spacing can vary depending on the specific model or intended use of the digger.
- Twist or Spiral Design: The auger blades are shaped in a twist or spiral pattern. This design allows them to efficiently move through the soil as they rotate. The twisting motion helps break up the soil and facilitates the removal process.
- Blade Point: The bottom end of each auger blade usually comes to a sharp point. This point helps initiate the penetration into the ground, allowing the blades to start digging and create a hole.
When using a manual post hole digger, the operator grips the handles, positions the auger blades at the desired location, and applies downward force while simultaneously twisting the digger. This action drives the blades into the ground, loosening the soil. The operator then lifts the digger out of the hole, bringing the loosened soil to the surface.
By understanding the key components and their functions, operators can effectively utilize a manual post hole digger to dig holes for various purposes.
editor by CX 2024-01-01
China Hot selling Hydraulic Earth Auger Drive Machine Drill Bit Post Hole Digger pto shaft adapter tractor supply
Product Description
RAY ATTACHMENTS Earth Auger is a kind of CHINAMFG hole machine. It can be mounted to all common hydraulic excavators as well as mini excavator and other carrier like skid steer loader, backhoe loader,telescopic handler, wheel loader and other machinery.Our auger drive can installed with earth drill, stump planner, mixer bowl for different uses.
Specification:
| Model | Oil Folw | Max Torque | Pressure | Rotary Speed | Carrier | Oil Hose | Drill Dia. | |||
| gal./min | I/min | Lbf·Ft | N·M | Psi | Bar | Rpm | T | Inch | mm | |
| REA2000 | 6-14 | 23-53 | 2537 | 1871 | 3000 | 205 | 40-92 | 1-2.5 | 1/2 | 100-400 |
| REA2500 | 8-16 | 30-61 | 3297 | 2432 | 3000 | 205 | 40-82 | 1.5-3 | 1/2 | 100-500 |
| REA3000 | 8-16 | 30-61 | 3900 | 2877 | 3500 | 240 | 40-81 | 2-3.5 | 1/2 | 100-600 |
| REA3500 | 8-18 | 30-68 | 4900 | 3614 | 3500 | 240 | 32-72 | 2.5-4.5 | 1/2 | 100-750 |
| REA4500 | 10-20 | 38-76 | 5719 | 4218 | 3500 | 240 | 32-64 | 3-5 | 1/2 | 100-900 |
| REA5000 | 10-20 | 38-76 | 6855 | 5056 | 3500 | 240 | 29-58 | 4.5-7 | 1/2 | 150-600 |
| REA5500 | 12-22 | 45-83 | 8012 | 5910 | 3500 | 240 | 28-50 | 5-7 | 1/2 | 150-750 |
| REA6000 | 12-28 | 45-106 | 8338 | 6150 | 3500 | 240 | 34-80 | 6-8 | 3/4 | 150-900 |
| REA7000 | 16-32 | 61-121 | 9397 | 6931 | 3500 | 240 | 37-72 | 7-10 | 3/4 | 150-900 |
| REA8000 | 16-36 | 61-136 | 1571 | 8048 | 3500 | 240 | 29-64 | 8-12 | 3/4 | 150-900 |
| REA10000 | 18-36 | 70-136 | 14612 | 1571 | 3500 | 240 | 26-45 | 10-13 | 3/4 | 150-900 |
| REA12000 | 21-37 | 80-140 | 16236 | 11976 | 3500 | 240 | 22-43 | 13-17 | 1 | 150-900 |
| REA15000 | 21-40 | 80-151 | 20399 | 15046 | 3500 | 240 | 20-39 | 13-17 | 1 | 150-1200 |
| REA20000 | 21-45 | 80-170 | 25812 | 19039 | 3500 | 240 | 17-34 | 13-20 | 1 | 150-1200 |
| REA25000 | 24-48 | 90-180 | 33825 | 24949 | 3500 | 240 | 16-30 | 15-23 | 1 | 150-1200 |
| REA50000 | 26-74 | 100-280 | 68052 | 50195 | 4000 | 280 | 11-30 | 21-50 | 1 | 300-2400 |
Aslo, these details just help you know our products quickly. Please feel free to contact with me ,that’s my duty and honor to help you find the appropriate product.
Q: Are you a manufacturer?
A: Yes,our factory was established in 2002 and we have our own trading company.
Q: Are you sure your product will fit my excavator?
A: Yes, we are professional about this, you can also tell me your excavator model, and we will check it for you.
Q: Can you provide customers’ design?
A: Sure, we can provide OEM and ODM service.
Q: What’s the MOQ and payment terms?
A: MOQ is 1set. Payment via T/T,L/C, Western Union accepted, other terms can be negotiated.
Q: How about delivery time?
A: 5-25 work days after the payment, depend on your quantity.
Q: How about the package?
A: Our earth auger packed by polywood case.
Q: Which country have you exported?
A: Vietnam, Saudi Arabia, America, Thailand, New Zealand, Canada, Australia, Peru, Chile, Brazil, Mexico, Iran, South Africa, etc.
| After-sales Service: | Video Technical Support, Online Support |
|---|---|
| Warranty: | 18 Months for Excavator |
| Certification: | CE, ISO 9001:2008 |
| Condition: | New |
| Drill Hole Diameter: | 100mm – 1200mm |
| Drill Hole Depth: | 1m – 30m |
| Customization: |
Available
| Customized Request |
|---|
What maintenance practices are essential for prolonging the lifespan of a post hole digger?
Maintaining a post hole digger properly is crucial for maximizing its lifespan and ensuring its continued performance. Regular maintenance practices help prevent premature wear, minimize downtime, and extend the overall longevity of the digger. Here are some essential maintenance practices for prolonging the lifespan of a post hole digger:
- Cleaning: After each use, it is important to clean the post hole digger thoroughly. Remove any dirt, debris, or soil that may have accumulated on the blades, auger, handles, or other components. Use a brush or hose to remove stubborn dirt. Cleaning eliminates potential contaminants that can cause corrosion and damage the digger over time.
- Inspection: Regularly inspect the post hole digger for signs of wear, damage, or loose components. Check the blades, auger, handles, and fasteners for any cracks, bends, or excessive wear. Ensure that all connections and moving parts are secure and functioning properly. Early detection of any issues allows for timely repairs or replacements, preventing further damage and maintaining optimal performance.
- Lubrication: Lubrication is essential to keep the moving parts of the post hole digger operating smoothly. Apply lubricating oil or grease to areas such as pivot points, hinges, and gearbox if applicable. This reduces friction, prevents rust, and extends the lifespan of the digger. Follow the manufacturer’s recommendations regarding the type and frequency of lubrication.
- Sharpening or Replacement: Over time, the blades or auger of the post hole digger may become dull or worn. Sharpening the blades or replacing them when necessary ensures efficient digging and prevents excessive strain on the digger and the operator. Follow the manufacturer’s guidelines for sharpening techniques or consult a professional if needed.
- Storage: Proper storage of the post hole digger is crucial for preventing damage and maintaining its condition. Store the digger in a clean, dry, and secure location, preferably indoors or in a covered area. Protect the blades and auger from moisture, which can cause rust. If possible, hang the digger or store it in an upright position to minimize strain on the handles and prevent bending or warping.
- Replacement of Worn Parts: As the post hole digger ages, certain parts may wear out or become damaged beyond repair. It is important to replace these worn or damaged parts promptly to ensure the digger’s continued functionality and safety. Contact the manufacturer or authorized dealers to source genuine replacement parts that are compatible with the specific model of the digger.
- Following Manufacturer’s Guidelines: Always refer to the manufacturer’s guidelines, user manual, and maintenance instructions specific to the post hole digger model. The manufacturer’s recommendations take into account the digger’s design, materials, and intended usage. Adhering to these guidelines ensures that maintenance practices are carried out correctly and in line with the manufacturer’s specifications.
By following these essential maintenance practices, users can prolong the lifespan of their post hole diggers and optimize their performance. Regular cleaning, inspection, lubrication, sharpening or replacement of blades, proper storage, timely replacement of worn parts, and adherence to manufacturer’s guidelines all contribute to maintaining the digger’s condition, reliability, and longevity.
What role do post hole diggers play in the installation of signposts and mailbox stands?
Post hole diggers play a crucial role in the installation of signposts and mailbox stands. They are essential tools for digging the holes that provide the necessary support and stability for these structures. Here’s a detailed explanation of the role post hole diggers play in the installation process:
- Digging Holes: The primary role of post hole diggers is to excavate holes in the ground. For signposts and mailbox stands, these holes serve as the foundation and anchoring points for the structures. Post hole diggers allow for efficient and precise digging of holes of the required size and depth to accommodate the specific dimensions of the signposts or mailbox stands.
- Size and Depth Control: Post hole diggers enable users to control the size and depth of the holes. Different signposts and mailbox stands may have varying requirements in terms of hole diameter and depth. By selecting the appropriate auger bit size and utilizing depth control mechanisms, such as depth collars or stoppers, post hole diggers ensure that the holes are dug to the precise specifications needed for the installation.
- Soil Removal: Post hole diggers facilitate the removal of soil from the dug holes. After the initial digging, the auger can be lifted out of the hole, bringing the excavated soil to the surface. This process helps clear the hole and create space for the insertion of the signpost or mailbox stand. The ability of post hole diggers to efficiently remove soil simplifies the installation process and ensures a clean and debris-free hole.
- Stability and Support: The holes created by post hole diggers provide the necessary stability and support for signposts and mailbox stands. Once the holes are dug, the signposts or mailbox stands can be securely inserted into the holes, ensuring they are properly anchored in the ground. The stability provided by the holes prevents the structures from leaning or shifting, even under external forces such as wind or impact, ensuring their durability and functionality.
- Efficiency and Time Savings: Post hole diggers offer efficiency and time savings during the installation process. Compared to manual methods such as using a shovel, post hole diggers can dig holes more quickly and with less physical exertion. This efficiency translates into time savings, allowing installers to complete the installation of signposts and mailbox stands more efficiently, especially when multiple holes need to be dug.
- Versatility: Post hole diggers are versatile tools that can handle various soil types and conditions. Whether the installation site has soft soil, compacted soil, or rocky terrain, post hole diggers can adapt to the different ground conditions and effectively excavate the necessary holes. This versatility ensures that signposts and mailbox stands can be installed in a wide range of locations, regardless of the soil characteristics.
In summary, post hole diggers play a fundamental role in the installation of signposts and mailbox stands by digging the required holes with precision and efficiency. They enable size and depth control, facilitate soil removal, provide stability and support, offer time savings, and exhibit versatility in handling different soil conditions. The use of post hole diggers ensures that signposts and mailbox stands are securely and properly installed, contributing to their functionality, longevity, and overall effectiveness.
Can you explain the different types of post hole diggers available?
There are several types of post hole diggers available, each designed for specific purposes and varying levels of manual effort. Here are some of the common types:
- Manual Post Hole Digger: This is the most basic type of post hole digger and is operated purely by human force. It consists of a long shaft with handles at the top and two auger blades at the bottom. Manual post hole diggers are suitable for smaller digging tasks and require physical exertion from the operator.
- Two-Person Post Hole Digger: Also known as a dual-handle post hole digger, this type requires two people to operate. It features longer handles to provide better leverage and stability. By having one person stabilize the digger while the other applies downward force, two-person post hole diggers make it easier to dig deeper and wider holes compared to a single-person manual digger.
- Clamshell Post Hole Digger: This type of digger has a hinged jaw-like mechanism instead of auger blades. The two halves of the clamshell digger close together when forced into the ground, and when lifted, they bring the soil along with them. Clamshell post hole diggers are useful for digging in loose or sandy soil where augers may not be as effective.
- Power Auger: Power augers are mechanical post hole diggers that are either gas-powered or electric-powered. They feature an engine or motor that drives the rotating auger blades into the ground. Power augers are more efficient and require less physical effort compared to manual diggers. They are suitable for larger digging tasks or when working with compacted or rocky soil.
- Hydraulic Post Hole Digger: Hydraulic post hole diggers are heavy-duty machines commonly used in construction or industrial settings. They are typically attached to tractors or other heavy machinery and utilize hydraulic power to drive the auger blades into the ground. Hydraulic diggers are capable of digging large and deep holes quickly and efficiently.
When choosing a post hole digger, factors such as the size of the holes needed, the type of soil, and the available physical strength or equipment should be taken into consideration. Each type of post hole digger has its advantages and is suited for different applications, so selecting the right one will ensure efficient and successful digging.
editor by CX 2023-11-17